Partners

International scientific partners:

Scientist/ institution

Short description of cooperation

Prof. Gleb Turiching, Polytechnical University St. Petersburg, Russia

Simulation of laser hybrid welding

Prof. Nozadze, Technical University Tibilisi, Georgia

Using of Basalt fiber reinforced materials

Prof. Poulis, Delft University of Technology, Netherlands

Aging behavior of adhesive bonded structures

Prof. Anna Xue, Utah State University, Logan, Utah

Role of crystal plasticity in the damage accumulation process under fatigue loading

Prof. Dr. D. Z. Ma, CIM Research Institute, Shanghai Jiao Tong Univer-sity, China

Joint competence center virtual and augmented reality in industry

Prof. Dr. H. Elhennawy, Dr. M. Salem, Information Technology Institute, Cairo, Egypt

Joint Master studies applied mecha-tronics

Dr. B. Vinod, Ph.D., PSG College of Technology, Coimbatore, India

Virtual Commissioning

Prof. Alda Simoes, IST, Portugal

Kinetics of self-repair processes

Prof. Mario Ferreira, UA, Portugal

Multilevel corrosion protection by means of self-healing

Prof. K. Konturri, Physical Chemistry, TKK, Espoo, Finnland

Synthesis and stability of metal nanoparticles

Prof. George Kordas, NCSR Demokritos, Greece

Multilevel corrosion protection by means of self-healing

Dr. Markus Valtiner, University of Santa Babara

Molecular Adhesion on Oxide Surfaces

Ass. Prof. David Grewell, Ph.D., Iowa State University

Precision injection moulding, welding of plastics

Prof. Dr. H. Iwaoka, KIT Japan

Micromachining, Nanotechnology

Prof. Dr. L. Shi, SNPC Shanghai

Nanotechnology, Nanoimprint

Prof. Dr. R. Schatz, KTH Sweden

Semiconductor lasers

Prof. Dr. B. Journet, ENSC France

Nonlinerar organic optical materials

Prof. Dr. O. Mikami, Tokai Univ.

Polymer waveguides, safe computers

Prof. Daehn, Ohio State University, Colubus, Ohio USA 

Hochgeschwindigkeitsumformung

Prof. Altan, Ohio State University, Colubus, Ohio USA 

Hydroforming

Prof. Kolleck, TU Graz, Graz, Austria

Simulation

Prof. Zhou, Chongquing University, Chongquing, China

Sheet Metal Forming

Prof. H. Sehitoglu, University of Illinois at Urbana-Champaing, USA

Metastable austenitic steels

Prof. I. Karaman, Texas A&M University, USA

Magnetic shape memory materials

Prof. K. Gall, Georgia Tech., USA

Biomaterials

Prof Y. Chumlyakov, Tomsk University, Russia 

Phase transformation in single crystals

Prof. Y. Estrin, Monash University, Australia

Ultrafine grained and nanocrystalline materials

CDTF Qingdao University China

D&D Material development

Prof. A. M. Dias, Prof. J. P. Nobre, Univ. Coimbra

Procedures for residual stress analysis

Prof. Liyi Shi, Shanghai University

Sol-Gel processes for near surface optimization

Prof. Ru Lin Peng, Linköping University

Residual Stress analysis in multiphase materials

Prof. Phil Bates
Canada Research Chair in Polymer Processing and Joining 

Welding of polymers

Department of Chemistry and Chemical Engineering Royal Military College of Canada

 

Professor Mats Oldenburg, Department of Applied Physics and Mechanical Engineering - Solid Mechanics, Lulea University of Technology, Sweden

Hot sheet metal forming, modeling and simulation of press hardening processes, thermo-mechanical processes

Professor Braham Prakash, Department of Applied Physics and Mechanical Engineering - Machine Elements, Lulea University of Technology, Sweden

Hot sheet metal forming, thermo-mechanical processes

Prof. Dr. Ir. Ruud Beerkens, TNO Science & Industry, Glass Group, Eindhoven, Niederlande

International Commission on Glass

Prof. Dr. Wolfram Höland, ETH Zürich und Ivoclar Vivadent, Schweiz und Lichtenstein

International Commission on Glass

Prof. Dr. John M. Parker, University of Sheffield, UK

International Commission on Glass

Companies:

Company

Short description of cooperation

Areva GmbH

High temperature fatigue of stainless steels

Audi AG

Production Processes Development of hybrid production technologies

Akzo, SSAB, Voest-Alpine, Ruki-Steel (EU-Project)

Self healing mechanisms in coil coatings

BASF Coatings AG

Selective deposition of dispersions at grain boundaries (corrosion protection)

BASF SE

Compounding and process modeling

BBraun AG

Plastics for medical devices
Nanosensorics in anesthesia, dialysis
Knowledge management systems

Benteler AG

Steel/CFC components for automotive applications
D-Project Mass reduced structures

Benteler Automobiltechnik GmbH

Development and process technology of press hardening steels

Benteler-SGL GmbH

Development and process technology of fiber reinforced plastic / steel hybrid systems

Benteler AG, Paderborn

Forming Technology

Benteler SGL Carbon 

Reinforced Material (CFK, GFK)

BMW AG

Ultra-thin amorphous conversion films on metals

Boeing

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Bond Laminates

D&D-project confidential

Bosch

Reprocessing of electronic control unit

Böllhoff Plastic Division

D&D-project confidential

Chemetall AG

Thin layer corrosion protection
Simulation of adhesion and de-adhesion processes

Companies of DVS (Deutscher Verband für Schweißtechnik)

Welding technology

Companies of VDMA (Verband deutscher Maschinen- und Anlagenhersteller)

Single Screw extrusion

Companies of "Verein zur Förderung der Kunststofftechnologie"

Technology Transfer

Continental AG

Lifetime model for multi-purpose displays

Daimler AG

Production technologies for Piezoelectric actuatorsa
Prediction for corrosion under mechanical stress
Reproducible manufacturing of elektrochromic polymer films
Forming Technology
High strain rate deformation

Dörken AG

High wear resistant coatings with low friction

EADS München

Technology strategies and trends

EOS

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Evonik

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

HIMA AG

Safety systems

Horsch

Forming Technology

JetAviation

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Lafarge AG

Characteristics of Cement Pellets and Influence of humidity

Lanxess

D&D-project confidential

Laytec GmbH

Nanosensorics for temperat. sensing

Lemken

Forming Technology

Linde MH Aschaffenburg

Age differentiated working systems

Mankiewicz GmbH

Domain structures in organic-in organic hybrid coatings

MaZet AG / Carl Zeiss AG

Nanosensorics for color sensing

MTT Technologies

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Miele 

Forming Technology

Novelis 

Aluminum

NPS 

Micromirrorarrays for light steering

OPN GmbH

Nanospectrometers in medical techn.

Philipp Morris

Formation of binary Aerosol Droplets

Phoenix Contact Deutschland GmbH

Potential analysis for an product optimization regarding the integration of electrical and mechanical components

Plasmatreat 

D-Project Plasmainjection inline

Poynting GmbH 

High-Speed-Forming

Raspe 

Forming Technology

Salzgitter Stahl AG 

Steel Application / Forming Technol.

Schwering & Hasse Elektrodraht (EFRE Project)

Coatings with extreme low friction via anchored liquids on the surface

Siemens 

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Siemens Westinghouse 

Crack initiation and crack growth in Ni-base superalloys

Stratasys 

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

Stükerjürgen 

Direct Manufacturing of plastic and metal parts by Laser Sintering, Laser Melting and Fused Deposition Modeling, respectively

ThyssenKrupp Stahl AG

Plasma activation of Zn-alloy coatings
Steel Application / Forming Technol.

Visteon Deutschland GmbH

Virtual Prototyping of lighting systems

VW AG 

Production technologies for electric engines
Safety-relevant hybrid plastic/ metal structures
Functional graded materials
Thermomechanical behaviour of materials for exhaust systems
Age differentiated working systems
Roadmapping and Foresight

Weidmüller Interface GmbH & Co. KG

Technology foresight for electrical connectivity

Westfalia 

Light weight construction of trailer hitches

Whitefox Ltd 

Separation membranes base on PBI

Wincor Nixdorf International 

Wincor Nixdorf International

Nach oben