Laboratory
This page contains automatically translated content.
- Nominal load: 250 kN
- Mechanical design: 2 backlash-free precision ball screws, with spindle protection Drive via AC servo motor,
- Stiffness of the test frame: 200 kN/mm (incl. deformation of the load cell and tool adapter)
- Test speed: 0.0005 - 175 mm/min (optionally expandable)
- Resolution of the crosshead travel measurement: < 0.0002 µm
- Force measurement range: Class 1 (optionally class 0.5) from 0.1 - 100 % of the nominal load depending on the force sensor used (according to DIN EN ISO 7500-1, ASTM E4)
- Resolution of the force measurement: 24 bit (±8,388,608 digits)
- Measuring, control and regulation electronics: force and crosshead travel channel integrated. Additional 3 free slots* for expansion cards for analog/digital inputs/outputs for force, displacement and strain gauges, as well as +/-10V input for external measuring devices, safety gate connection
Contact: Moritz Rößer M.Sc.
Netzsch LFA 467 HT
- Measurement of thermal and temperature conductivity according to the laser flash principle
- Max. Heating rate: 50 K/min
- Temperature range: RT to 1250°C
- Thermal diffusivity: 0.01-2000 mm²/s
- Thermal conductivity: 0.1-4000 W/(m*K)
Netzsch STA 449 F3 Jupiter
- Simultaneous application of thermogravimetry and differential scanning calorimetry
- Atmospheres: inert, oxidizing, reducing
- SiC furnace & platinum furnace
- Temperature range: RT up to 1500°C (Pt)/1600°C (SiC)
- Weighing range: up to 35000 mg
Netzsch DIL 402 Expedis Supreme
- Measurement of temperature-dependent linear expansion
- Temperature range: -150 to 1600 °C
- Measuring range: +/- 25,000 µm
- Resolution: 0.1 nm
Contact: Stefanie Kracun M.Sc.
- Measuring range: 500 mm x 380 mm (accuracy on ball distance standard: 0.053 mm)
- Working distance: 440 mm
- Point distance: 0.19 mm
- Calibration object for this sensor with certificate
- Acceptance test with ball dumbbells in accordance with VDI 2634 Sheet 3
- Acceptance certificate with proof of traceability
Contact: Andreas Schilling M.Sc.
- User-independent scan due to constant measuring distance between measuring head and object table
- Measuring range Ø 500 mm x H 200 mm
- Measuring accuracy:10µm
- Traceable measuring accuracy by means of spherical scale
- Mark-free alignment, built-in pyramids for reliable measurement regardless of geometry
- Integrated curtain to minimize environmental influences
- Vibration-damped setup
- Two LED projectors and one camera, 2 lenses
Contact person: Stefanie Kracun M.Sc.
- Principle: optical emission spectrometry (OES)
- Hybrid system: analog photomultiplier detectors (PMT) and digital CCD sensors.
- Allows EXTREMELY high accuracies
- Measurement of Fe-, Al-, Mg-Cu-, Zn-based alloys. + rare earths possible
- Single spark analysis
- Qualitative: oxides, nitrides, carbides
Contact: Moritz Rößer M.Sc.
- - 20x-5000x magnification
- - autom. movable table
- - Line and area scan
- - Relief evaluation
- - porosity / microstructure
- - swiveling
- - transportable
Contact: Moritz Rößer M.Sc.
- Light microscope: Zeiss Axio Imager 2 with color camera and Axio Vision image analysis software
- Stereomicroscope: Zeiss Stereo Discovery V8 with color camera and display
Contact person: Moritz Rößer M.Sc.
- Test chamber volume 60l
- Temperature range -40 to +180 °C
- Humidity range 10% to 98% r.h.
Contact: Stefanie Kracun M.Sc.
Universal hardness testing machine for automatic and standard-compliant hardness testing for all hardness testing methods in the load level range 0.5-250 kg.
- Vickers, Brinell, Knoop,
- Manual optical evaluation via integrated video evaluation
- 4x/10x objective measuring range from min. 1000 HV 2 (0.06 mm) to max. 95 HB 2.5/187.5 (1.5 mm),
- motor-controlled load application
- 200 freely definable test programs
- Test method standardized Vickers - DIN EN ISO 6507
- 0,5 - 1 - 2 - 3 - 5 - 10 - 20 - 30 - 40 - 50 - 60 - 80 - 100 - 120
- Knoop - only HK 0.5 - 1
- Brinell - DIN EN ISO 6506
- 1/1 - 1/2,5 - 1/5 - 1/10 - 1/30 - 2,5/6,25 - 2,5/15,625 - 2,5/31,25 - 2,5/62,5 - 2,5/187,5 - 5/25 - 5/62,5 - 5/125 - 5/250 - 10/100 - 10/125 - 10/250
Contact: Moritz Rößer M.Sc.
- Universal molding material tester from Jung
- Flexural strength
- Shear strength
- Double shear strength
- Green tensile strength
- Green compressive strength
- Compactability
- Splitting strength
- Wet tensile strength tester from Jung
- Gas permeability tester company Jung
- Moisture analyzer company Kern
- Resonance test rig Company Lang
- Analytical sieve shaker EML200 Premium Remote Company Haver&Boecker
- For dry and wet sieving
- Mesh sizes (mm): 0.02; 0.063; 0.09; 0.125; 0.18; 0.25; 0.355; 0.5; 0.71; 1; 1.4
Contact: Andreas Schilling M.Sc.