Ver­öf­fent­li­chun­gen

2022

Klute, M., Heim, H.-P., 2022. Using Thermoplastic Polyester Polyurethanes as a Bonding Agent for Poly(Lactic Acid) in Two Component Injection Molding, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan.
Güzel, K., Zarges, J.-C., Heim, H.-P., 2022. In-situ Visualization of the Influence of Morphological Properties on the Mechanical Deformation Behavior of Physically Foamed Polycarbonate, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan.
Japins, G., Giesen, R.-U., Hartung, M., Heim, H.-P., 2022. Direct injection molding as a prospective method for TPE based medical disposable manufacturing, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan.
Zurawik, R., Volke, J., Zarges, J.-C., Heim, H.-P., 2022. Comparison of Real and Simulated Fiber Orientations in Injection Molded Short Glass Fiber Reinforced Polyamide by X-ray Microtomography. Polymers 2022 14(1), TBD. https://doi.org/https://doi.org/10.3390/polym14010029
Goetjes, V., Gemmeke, N., Heim, H.-P., 2022. Biokunststoffe und deren Beständigkeit. Kunststoff Innovation 1, 30–33.
Güzel, K., Zarges, J.-C., Heim, H.-P., 2022. Effect of Cell Morphology on Flexural Behavior of Injection-Molded Microcellular Polycarbonate. Materials 2022, Special Issue  „Polymer Foams: Materials, Processing and Properties“ 15 (10), 3634. https://doi.org/https://doi.org/10.3390/ma15103634
Eckel, E., Schlink, A., Heim, H.-P., 2022. Development of an approach to determine the electrical resistance in the contact area of conductive thermoplastic compounds and contact pins joined via assembly injection molding, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan..
Elsesser, T., Ries, A., Heim, H.-P., 2022. Development of semifinished thermoplastic fiber products with integrated electromagnetic shielding properties, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan.
Kahl, C., Schlink, A., Heim, H.-P., 2022. Pultruded Hybrid Reinforced Compounds with Glass/Cellulose Fibers in a Polybutylene Terephthalate Matrix: Property Investigation. Polymers 2022, 14, 1149. https://doi.org/https://doi.org/10.3390/polym14061149
Marl, S., Giesen, R.-U., Klier, K., Hartung, M., Rüppel, A., Heim, H.-P., 2022. Flüssigsilikon ohne Fremdstoffe schäumen. Kautschuk Gummi Kunststoffe 75, 30–34.
Jakob, F., Gothe, M., Gansiniec, F., Heim, H.-P., 2022. Investigation of the adhesive strength in a combined compaction and back-injection process to produce back-injected self-reinforced composites (SRCs) International Polymer Processing. International Polymer Processing 1–12. https://doi.org/0.1515/ipp-2022-4205
Volke, J., Heim, H.-P., 2022. Prediction of injection molding process parameters using machine learning methods, 37th International Conference of the Polymer Processing Society, Fukuoka, Japan.

2021

Marl, S., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2021. LSR foams: comparison of different blowing agents, 36th International Conference of the Polymer Processing Society, Montreal, Canada.
Erdmann, R., Kabasci, S., Heim, H.-P., 2021. Thermal Properties of Plasticized Cellulose Acetate and Its β-Relaxation Phenomenon. Polymers 13, 1–14. https://doi.org/10.3390/polym13091356
Jakob, F., Pollmeier, J., Heim, H.-P., 2021. Process influences in the combined compacting and back-injection process to produce back-injected self-reinforced composites (SRCs) - analysis via multiple regression modelling. International Polymer Processing 36, 608–619. https://doi.org/https://doi.org/10.1515/ipp-2020-4105
Nikousaleh, M.A., Riemann, N., Hartung, M., Giesen, R.-U., Heim, H.-P., 2021. Mehrkomponenten-Spritzgießen von TP/LSR-Verbunden „Herstellung von medizintechnischen Multifunktionsteilen“. WT Werkstattstechnik 111, 440–445. https://doi.org/DOI 10.37544/1436-4980-2021-06-84
Japins, G., Hartung, M., Heim, H.-P., 2021. Entwicklung der direktverarbeitenden Fertigung für medizinische Einwegprodukte „Direktcompoundierung für die Medizintechnik“. WT Werkstattstechnik 111, 435–439. https://doi.org/DOI 10.37544/1436-4980-2021-06-79
Zarges, J.-C., Heim, H.-P., 2021. Influence of cyclic loads on the fiber-matrix-interaction of cellulose and glass fibers in polypropylene. Composites Part A: Applied Science and Manufacturing 149, 1–12. https://doi.org/https://doi.org/10.1016/j.compositesa.2021.106491
Mrzljak, S., Delp, A., Schlink, A., Zarges, J.-C., Hülsbusch, D., Heim, H.-P., Walther, F., 2021. Constant Temperature Approach for the Assessment of Injection Molding Parameter Influence on the Fatigue Behavior of Short Glass Fiber Reinforced Polyamide 6. Polymers 13, 1569. https://doi.org/https://doi.org/10.3390/polym13101569
Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Quicker Evaluation of the Optimum Operating Point. Kunststoffe International 3, 24–27.
Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Schneller zum optimalen Betriebspunkt. Kunststoffe 4, 32–35.
Wolff, S., Heim, H.-P., 2021. Odor and Emission Characteristics of cellulose Bio-Polyamide Compounds, in: Universität Kassel, F.K. (Hrsg.), 23rd Conference Odour and Emission of Plastic Materials. Kassel / Germany, S. TBD.
Jakob, F., Pollmeier, J., Bisevac, S., Heim, H.-P., 2021. Modification of self-reinforced composites (SRCs) via film-stacking process. International Polymer Processing TBD.
Marl, S., Rüppel, A., Hartung, M., Klier, K., Giesen, R.-U., Heim, H.-P., 2021. LSR foam produced with water as blowing agent, Poster, Institute of Materials Engineering-Plastics Engineering, University of Kassel, Kassel, Germany.
Güzel, K., 2021. Findings of Research and Development. Foammelt - Success with low pressure, ENGEL Firma, virtual.
Güzel, K., 2021. Erkenntnisse aus Forschung und Entwicklung, Foammelt - Mit wenig Druck zum Erfolg, ENGEL Firma, Virtual.
Kahl, C., Gemmeke, N., Bagnucki, J., Heim, H.-P., 2021. Investigations on fiber-matrix properties of heat-treated and UV-treated regenerated cellulose fibers. Composites Part A: Applied Science and Manufacturing 26. https://doi.org/https://doi.org/10.1016/j.compositesa.2021.106669
Hartung, M., Nikousaleh, M.A., Giesen, R.-U., 2021. 2K-Spritzgießen mit variothermer Temperierung von Werkzeugeinsätzen, SKZ Siliconelastomere, Würzburg.
Volke, J., Finkeldey, F., Zarges, J.-C., Wiederkehr, P., Heim, H.-P., 2021. Learning quality characteristics for plastic injection molding processes using a combination of simulated and measured data, 36th International Conference of the Polymer Processing Society, Montreal, Canada.
Güzel, K., Heim, H.-P., 2021. The Effect of Injection Molding Parameters on Microcellular Foam Morphology, SPE FOAMS® Conference, Virtual.
Marl, S., Rüppel, A., Hartung, M., Klier, K., Giesen, R.-U., Heim, H.-P., 2021. LSR foams made with water as blowing agent. Advanced Engineering Materials 1–20. https://doi.org/10.1002/adem.202100382
Hartung, M., Nikousaleh, M.A., Riemann, N., Giesen, R.-U., 2021. Hart trifft auf weich in einem Guss: Einmalartikel aus Thermoplasten und Silikonen. FUTURE MANUFACTURING 24–25.

2020

Wolff, S., Heim, H.-P., 2020. Influences of Processing Parameters on Odour Characteristics of Compounds produced from Renewable Raw Materials, in: Universität Kassel, F.K. (Hrsg.), 22nd Conference Odour and Emission of Plastic Materials. Kassel / Germany, S. TBD.
Wübbeke, A., Schöppner, V., Paul, A., Tiemann, M., Austermeier, L., Fitze, M., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., Schmidt, M., 2020. Long- and Short-Term Tensile Strength and Morphology of Joined Beta- Nucleated Polypropylene Parts. SPE ANTEC® 2020: The Virtual Edition 5.
Rüppel, A., Giesen, R.-U., Heim, H.-P., 2020. Chemical and mechanical analysis of the post-curing process of different low volatile liquid silicone rubbers, in: Smithers (Hrsg.), Silicone Elastomers World Summit. virtual, S. TBD.
Rüppel, A., Giesen, R.-U., Heim, H.-P., 2020. Investigation of the Post Curing Process of Liquid Silicone Rubber using Mechanical Tests Methods and Gas Chromatography, in: Smithers (Hrsg.), Silicone & TPE Elastomers US Summit. virtual, S. TBD.
Zarges, J.-C., Sälzer, P., Heim, H.-P., 2020. Correlation of fiber orientation and fiber-matrix-interaction of injectionmolded polypropylene cellulose fiber composites. Composites Part A: Applied Science and Manufacturing 139, TBD. https://doi.org/10.1016/j.compositesa.2020.106112
Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., Mariatti, M., 2020. Simultaneous impact modified and chain extended glass fiber reinforced poly(lactic acid) composites - Mechanical, thermal, crystallization and dynamic mechanical performance. Journal of Applied Polymer Science e49752. https://doi.org/10.1002/app.49752
Finkeldey, F., Volke, J., Zarges, J.-C., Heim, H.-P., Wiederkehr, P., 2020. Learning quality characteristics for plastic injection molding processes using a combination of simulated and measured data. Journal of Manufacturing Processes 60, 134–143. https://doi.org/10.1016/j.jmapro.2020.10.028
Giesen, R.-U., Nikousaleh, M.A., Hartung, M., Heim, H.-P., 2020. Hard-soft components for medical applications, LSR innovations 2020, Neuss.
Marl, S., Klier, K., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2020. Injection moulding of silicone foam with water as foaming agent, International Silicone Conference.
Wübbeke, A., Schöppner, V., Geißler, B., Schmidt, M., Magnier, A., Niendorf, T., Jakob, F., Heim, H.-P., 2020. Investigation of Residual Stresses of Hot Plate Welding. Welding in the World 64, 1671–1680. https://doi.org/10.1007/s40194-020-00939-7
Güzel, K., Klute, M., Kurgan, N., Heim, H.-P., 2020. Influence of the Degree of Crystallinity and the Surface Free Energy on the Adhesion Properties of Different PLA/PBS Blends in Multicomponent Injection Molding, The 35th International Conference of the Polymer Processing Society, Izmir, Turkey. https://doi.org/10.1063/1.5142934
Marl, S., Klier, K., Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2020. LSR foams made with water as blowing agent, 6th CellMAT, Virtual.

2019

Ricoeur, A., Judt, P., Zarges, J.-C., Feldmann, M., Heim, H.-P., 2019. Deflecting mode-I cracks in anisotropic materials. Mechanics of Materials 103060 (13pp). https://doi.org/10.1016/j.mechmat.2019.05.007
Hofmann, J., von Boyneburgk, C., Tunger, S., Heim, H.-P., Kuhl, D., 2019. Parameter identification for constitutive models of innovative textile composite materials using digital image correlation, Proceedings in Applied Mathematics and Mechanics. https://doi.org/10.1002/pamm.201900416
Hofmann, J.F., von Boyneburgk, C., Tunger, S., Heim, H.-P., Kuhl, D., 2019. Parameter identification for constitutive models of textile composite materials using digital image correlation, Proceedings of the 8th GACM Colloquium on Computational Mechanics For Young Scientists From Academia and Industry, 195-198.
Klute, M., Fuchs, J., Heim, H.-P., 2019. Blending CA with PBS to increase the bonding strength in two-component injection molding. ANTEC 2019, Society of Plastic Engineers, Detroit, USA.
Moritzer, E., Hirsch, A., Heim, H.-P., Cherif, C., Truemper, W., 2019. Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. Welding in the World; 63, 867–873. https://doi.org/10.1007/s40194-019-00714-3
Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Mariatti, M., Feldmann, M., 2019. Oxidative induction and performance of oil palm fiber reinforced polypropylene composites - Effects of coupling agent and UV stabilizer. Composites Part A: Applied Science and Manufacturing 125, 105577. https://doi.org/10.1016/j.compositesa.2019.105577
Tromm, M., Shaayegan, V., Wang, S., Heim, H.-P., Park, C.B., 2019. Investigation of the mold-filling phenomenon in high-pressure foam injection molding and its effects on the cellular structure in expanded foams. The international Journal for the Science and Technology of Polymers and Biopolymers 160, 43–52. https://doi.org/10.1016/j.polymer.2018.11.006
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2019. The Influence of different die geometries on the Extrusion Process of High-Consistency Silicone Rubber. ANTEC 2019, Society of Plastic Engineers, Detroit, USA.
Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Alam, A.K.M.M., Heim, H.-P., Feldmann, M., 2019. Synergized poly(lactic acid)-hydroxyapatite composites: Biocompatibility study. Journal of Applied Polymer Science 136, 47400. https://doi.org/10.1002/app.47400
Giesen, R.-U., Hartung, M., Heim, H.-P., 2019. Using UV-light for silicone processing methods, Silicone Elastomers 2019, Vienna.
Jakob, F., Mieth, F., Heim, H.-P., Marten, S., 2019. Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement. International Polymer Processing (IPP) 2019, 532–540. https://doi.org/10.3139/217.3812
Marl, S., Giesen, R.-U., Hartung, M., Heim, H.-P., 2019. LSR foam produced by injection molding. Rubber Fibres Plastics International 14, 228–231.
Sälzer, P., Heim, H.-P., 2019. Correlation between Processing and Mechanical Properties of Composites with Organic Fillers, 34th Polymer Processing Society, Taipei,Taiwan.
Von Boyneburgk, C., Fuchs, J., Klute, M., Sälzer, P., Zarges, J.-C., Heim, H.-P., Gemmeke, N., 2019. Aktuelle Schwerpunktthemen im Bereich der Biokunststoffe und Bioverbundwerkstoffe, Poster. NaroTech.
Gemmeke, N., Heim, H.-P., 2019. Flammgeschützte biobasierte Kunststoffe, Poster. Werkstofftechnik, Universität Kassel, Kassel, Germany.
Schlitt, C., Hartung, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2019. UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process. International Polymer Processing 34, 30–36. https://doi.org/10.3139/217.3509
Marl, S., Hartung, M., Giesen, R.-U., Heim, H.-P., 2019. Flexible Foams made of Liquid Silicone Rubber and expandable Microspheres, SPE FOAMS® 2019: Advances in Foam Materials and Technology, Valladolid, Spanien.
Von Boyneburgk, C., Sälzer, P., Fuchs, J., Heim, H.-P., 2019. Influence of the Adhesion on the Mechanical Chracteristics of Self-Reinforced Polymer-Veneer-Composites, Baltic Polymer Symposium 2019, Vilnius, Lithuania.
Weber, J., Heim, H.-P., 2019. A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids. International Polymer Processing (IPP) 34, 91–99. https://doi.org/10.3139/217.3654
Hartung, M., Nikousaleh, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2019. UV Surface Treatment of Polycarbonate for Adhesion Improvement to Liquid Silicone Rubber (LSR). Journal of Plastics Technology 15, 189–209. https://doi.org/10.3139/0999.040220019
Giesen, R.-U., Hartung, M., Marl, S., Heim, H.-P., 2019. LSR-Schaum hergestellt im Spritzgießverfahren. GAK Gummi Fasern Kunststoffe 72, 314–317.
Gemmeke, N., Fuchs, J., Heim, H.-P., 2019. Natural fiber reinforced technical (bio-) composites modified with halogen-free flame retardants. ANTEC 2019, Society of Plastic Engineers, Detroit.
Gemmeke, N., Feldmann, M., Heim, H.-P., 2019. Processing and characterization of engineering biocomposites based on polybutylenterephthalat (PBT) and polytrimethylentherephthalat (PTT) with regenerated cellulose fibers modified with maleic anhydride grafted polyethylene as a processing agent. Composites Part A: Applied Science and Manufacturing 118, 327–335. https://doi.org/10.1016/j.compositesa.2019.01.007
Rüppel, A., Giesen, R.-U., Hartung, M., Klier, K., Heim, H.-P., 2019. Die Haftung von LSR-Polypropylen-Verbunden nach Lagerung
, in: INNOVENT e.V. Technologieentwicklung Jena (Hrsg.), ThGOT Thementage Grenz- und Oberflächentechnik. Zeulenroda, S. TBD.
Scheffler, B., Wetzel, A., Sälzer, P., Middendorf, B., 2019. Regenerated cellulosic fibers to enhance the stability under cyclic thermal stress. Beton- und Stahlbetonbau / Concrete and Reinforced Concrete Structures 114, 674–682. https://doi.org/10.1002/best.201900027

2018

Rüppel, A., Jähnig, D., Giesen, R.-U., Vajen, K., Heim, H.-P., 2018. Innovative Materials for Novel Concepts for Internal Heat Exchangers. International Polymer Processing (IPP), 453–459. https://doi.org/10.3139/217.3432
Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Natürlich nicht brennbar. Kunststoffe 108, 77–80.
Von Boyneburgk, C., Sälzer, P., Feldmann, M., Heim, H.-P., 2018. Characteristics of Self-Reinforced Polymer-Veneer-Composites under Impact Load, Poster. 34th International Conference of Polymer Processing Society, Taipei,Taiwan.
Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2018. Langzeitbeständigkeit der Silikatisierung und der Einfluss auf die Haftungseigenschaften zwischen Flüssigsilikonkautschuk-Thermoplastverbunden. Kautschuk Gummi Kunststoffe 2018, 20–25.
Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., 2018. Impact modified PLA-hydroxyapatite composites - Thermo-mechanical properties. Composites Part A: Applied Science and Manufacturing 107, 326–333. https://doi.org/10.1016/j.compositesa.2018.01.017
Zarges, J.-C., 2018. Charakterisierung des Bruchverhaltens von Polypropylen - Celluloseregeneratfaser - Verbunden. Kassel University Press GmbH, Kassel.
Heim, H.-P., Ries, A., 2018. Werkstoffe und Prozesse für den Leichtbau mit Kunststoffen, Fachtagung Werkstoffsymposium 2018, Salzgitter.
Feldmann, M., 2018. Biokunststoffe und Bioverbundwerkstoffe – Impulsvortrag, Sitzung des PA Kunststoffe der Forschungsvereinigung Antriebstechnik e.V., Fürth.
Judt, P., Zarges, J.-C., Ricoeur, A., Heim, H.-P., 2018. Anisotropic fracture properties and crack path prediction in glass and cellulose fiber reinforced composites. Engineering Fracture Mechanics 188, 344–360. https://doi.org/10.1016/j.engfracmech.2017.08.027
Rüppel, A., Giesen, R.-U., Hartung, M., Heim, H.-P., 2018. The Adhesion of LSR and different Polypropylene-Types after Storage Tests, in: - (Hrsg.), International Silicone Conference. Ohio, Cuyahoga, S. TBD.
Marl, S., Giesen, R.-U., Heim, H.-P., 2018. Injection Molding and Analysis of Liquid Silicone Rubber Foams with expandable Microspheres, 5th Cellmat, Bad Staffelstein, Deutschland.
Marl, S., Hartung, M., Giesen, R.-U., Heim, H.-P., 2018. Silicone Foams to reduce weight, save material and increase insulation properties, Silicone Elastomers World Summit 2018, Mailand, Italian.
Schlitt, C.U., Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., Walther, T., 2018. Haftungsrisiken gemindert. UVC-Licht verbessert durch Oberflächenaktivierung die Haftung zwischen PC und Silikon. Kunststoffe 108, 142–147.
Giesen, R.-U., Hartung, M., Marl, S., Heim, H.-P., 2018. LSR foams, in: Amos Golovy (Hrsg.), LSR 2018. Anaheim, USA, S. TBD.
Fuchs, J., Feldmann, M., Heim, H.-P., 2018. PLA-Blends with modified Starch Granules - Drying and Crosslinking of native potato Starch as well as subsequent blending with PLA in a one-step Compounding, 33rd International Conference of Polymer Processing Society, Cancun.
Kahl, C., Feldmann, M., Heim, H.-P., 2018. Inline UV light irradiation of cellulose and glass fibers in pultrusion of thermoplastics composites, ANTEC 2018, Society of Plastic Engineers, Orlando, USA.
Kohl, D., von Boyneburgk, C., Feldmann, M., Heim, H.-P., Böhm, S., 2018. Characterization of wood-based multi-material systems under dynamic impact stress. Wood Material Science and Engineering 56, 1–10. https://doi.org/10.1080/17480272.2018.1501605
Giesen, R.-U., Hartung, M., Heim, H.-P., 2018. Producing and analysing liquid silicone rubber foams, LSR innovations 2018, Cologne.
Schlitt, C., Hartung, M., Giesen, R.-U., Heim, H.-P., Rüppel, A., 2018. UV Pre-treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process. Journal of Plastics Technology / Zeitschrift Kunststofftechnik 15, 189–209. https://doi.org/10.3139/217.3509
Beg, M.D.H., Islam, M.R., Mamun, M.A.A., Heim, H.-P., Feldmann, M., Akindoyo, J.O., 2018. Characterization of polyamide 6.10 composites incorporated with microcrystalline cellulose fiber: Effects of fiber loading and impact modifier. Advances in Polymer Technology 37, 3412. https://doi.org/10.1002/adv.22125
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2018. Verarbeitung von Festsilikonkautschuk im Extrusionsprozess, Elastomerforum 2018, Osnabrück, Deutschland.
Ries, A., Heim, H.-P., 2018. Properties, process combinations and application potentials of self-reinforced thermoplastic composites, Fachtagung Faszination Hybrider Leichtbau,  Wolfsburg.
Gemmeke, N., Heim, H.-P., 2018. Potentiale und Anwendungen flammgeschützter, cellulosefaserverstärkter PTT und PBT Compounds in Elektro- und Elektronikanwendungen, NaroTech, Rudolstadt.
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2018. Die Extrusion von (Fest-)Silikonkautschuk - eine Verfahrensanalyse, VDI Fachtagung Kabelextrusion 2018, Nürnberg, Deutschland.
Tromm, M., Heim, H.-P., 2018. Schaum nach Maß-Eine Prozessvariante des Schaumspritzgießens eröffnet neue Leichtbaupotenziale. Kunststoffe 108, 56–61.
Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Naturally non flammabale. Kunststoffe international 108, 51–54.
Zarges, J.-C., Kaufhold, C., Feldmann, M., Heim, H.-P., 2018. Single fiber pull-out test of regenerated cellulose fibers in polypropylene: An energetic evaluation. Composites Part A: Applied Science and Manufacturing 105, 19–27. https://doi.org/10.1016/j.compositesa.2017.10.030
Sälzer, P., Feldmann, M., Heim, H.-P., 2018. Wood-Polypropylene Composites: Influence of Processing on the Particle Shape and Size in Correlation with the Mechanical Properties Using Dynamic Image Analysis. International Polymer Processing 33, 677–687. https://doi.org/10.3139/217.3446
Heim, H.-P., Giesen, R.-U., Rüppel, A., Hartung, M., Verheyen, F., 2018. Herstellung von Standardthermoplast-Silikon-Verbunden im Mehrkomponentenspritzguss, Kunststoffe in der Medizintechnik 2018, VDI-Tagung.
Kahl, C., Feldmann, M., Sälzer, P., Heim, H.-P., 2018. Advanced short fiber composites with hybrid reinforcement and selective fiber-matrix-adhesion based on polypropylene: Characterization of mechanical properties and fiber orientation using high-resolution X-ray tomography. Composites Part A: Applied Science and Manufacturing 111, 54–61. https://doi.org/10.1016/j.compositesa.2018.05.014
Klute, M., Feldmann, M., Heim, H.-P., 2018. Bio-Based Alternatives for Hard-Soft Connections. Kunststoffe international 40–44.
Klute, M., Feldmann, M., Heim, H.-P., 2018. Biobasierte Alternativen für Hart-Weich-Verbindungen. Kunststoffe 75–79.
Heim, H.-P., Giesen, R.-U., Rüppel, A., Hartung, M., Verheyen, F., 2018. Verbunde aus PC oder PP mit LSR sind marktreif. Thermoplast-Silikon-Verbunde im Mehrkomponentenspritzguss herstellen. Plastverarbeiter 13, 40–44.
Gemmeke, N., Feldmann, M., Heim, H.-P., 2018. Naturally Non-Flammable: PBT Compounds Modified with Natural Fiber Reinforcement as Flame Retardant. Kunststoffe international 51–54.
Fuchs, J., Feldmann, M., Assmann, C., Vorwerg, W., Heim, H.-P., 2018. Cross-Linked Hydrophobic Starch Granules in Blends with PLA. International Polymer Processing 33, 89–95. https://doi.org/10.3139/217.3407
Von Boyneburgk, C., Feldmann, M., Heim, H.-P., 2018. Self-Reinforced Polymer Veneer-Composites - Characteristics under Impact Load, Baltic Polymer Symposium 2018, Jurmala, Latvia.

2017

Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Heim, H.-P., 2017. Carbon Fiber Composites Materials, Lightweight and Sustainable Materials for Automotive Applications, CRC Press Chapter 6.
Rüppel, A., Hartung, M., Giesen, R.-U., Heim, H.-P., 2017. The Adhesion of LSR and Polypropylene, Silicone Elastomer World Summit, München.
Mieth, F., Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. The Extrusion Process of High Consistency Silicone Rubber, Silicone Elastomer World Summit, München.
Giesen, R.-U., Rüppel, A., Verheyen, F., Heim, H.-P., 2017. Modifikation von Festsilikonen mit Kieselsäuren, DGM Fachausschuss Polymerwerkstoffe, Dresden.
Tromm, M., Heim, H.-P., 2017. Conrolling cellular structure and surface quality in foam injection molding - innovative core-back mold for research, SPE FOAMS® 2017, Bayreuth.
Sälzer, P., Heim, H.-P., 2017. Einfluss der Prozessparameter bei der Verarbeitung von Wood-Plastic Composites, Werkstoffwoche, Dresden.
Akindoyo, J.O., Beg, M.D.H., Ghazali, S.B., Heim, H.-P., Feldmann, M., 2017. Effects of surface modification on dispersion, mechanical, thermal and dynamic mechanical properties of injection molded PLA-hydroxyapatite composites. Composites Part A: Applied Science and Manufacturing 1–37. https://doi.org/10.1016/j.compositesa.2017.09.013
Rüppel, A., Giesen, R.-U., Heim, H.-P., 2017. The Adhesion of LSR Thermoplastic Composites after Storage Tests, Antec 2017. Anaheim.
Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., 2017. Hart-Weich-Verbunde aus LSR und mit UV-Licht aktivierten Polycarbonaten. GAK-Gummi Fasern Kunststoffe 70, 648–651.
Giesen, R.-U., 2017. Beitrag zur Herstellung 3-dimensionaler Kunststoffscheiben mit integrierter Funktion zur Veränderung der Transparenz durch Elektrochromie. Kassel University Press GmbH, Kassel.
Jarka, S., 2017. Rotatives Vibrationsschweißen. Kassel University Press GmbH, Kassel.
Judt, P., Zarges, J.-C., Ricoeur, A., Heim, H.-P., 2017. Crack path predictions in fiber reinforced composites. Procedia Structural Integrity 5, 769–776. https://doi.org/10.1016/j.prostr.2017.07.168
Zarges, J.-C., Feldmann, M., Heim, H.-P., Judt, P., Ricoeur, A., 2017. Man-Made Cellulose Fiber Reinforced Polypropylene - Characterization of Fracture Toughness and Crack Path Simulation, Society of Plastics Engineers, ANTEC 2017, 693-698.
Rüppel, A., Giesen, R.-U., Heim, H.-P., 2017. Langzeitbeständigkeit der Silikatisierung und der Einfluss auf die Haftungseigenschaften zwischen LSR-Thermoplast-Verbunden, in: - (Hrsg.), Werkstoffwoche. Dresden, S. TBD.
Meri, R.M., Zicans, J., Ivanova, T., Saldabola, R., Reinholds, I., Roja, Z., Feldmann, M., Heim, H.-P., 2017. Fabrication and characterization of ethylene-octene copolymer composites with ionic liquid functionalized carbon nanotubes. Proceedings of the Estonian Academy of Sciences 66, 347–353. https://doi.org/10.3176/proc.2017.4.05
Giesen, R.-U., Adam, M., Methe, D., Heim, H.-P., 2017. Thermoplastic elastomers and PEDOT/PSS for electroactive polymers. TPE magazine 172–176.
Gemmeke, N., Feldmann, M., Heim, H.-P., 2017. PBT and Bio-based PTT reinforced with man-made cellulosic fibers, 33rd Polymer Processing Society  (PPS-33), Cancun 
Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., 2017. UV Pre-treatment of Thermoplast Components for LSR - Thermoplastic Parts, LSR 2017, Anaheim, USA.
Feldmann, M., 2017. Stoffliche Nutzung von Holz in der Kunststofftechnik. Ein zuverlässiger Rohstoff für die Zukunft!?, Zweiter Workshop „Bioökonomie in Hessen“, Kassel.
Schlitt, C., 2017. Einfluss der Prozessparameter auf Verbundfestigkeiten beim PA6-/ LSR-Mehrkomponentenspritzgießen, Rubber Meets Science, Aachen, Deutschland.
Tromm, M., Heim, H.-P., 2017. Thermoplast-Schaumspritzgießverfahren pull and foam. Schlussbericht IGF-Vorhaben Nr. 18254 N/1. Institut für Werkstofftechnik - Fachgebiet Kunstofftechnik, Kassel.
Judt, P., Ricoeur, A., Zarges, J.-C., Feldmann, M., Heim, H.-P., 2017. Bruchmechanische Untersuchungen und Risswachstum in heterogenen anisotropen Werkstoffen, Werkstoffwoche 2017, Dresden.
Kahl, C., Feldmann, M., Heim, H.-P., 2017. Advanced short fiber composites with hybrid reinforcement based on glass and cellulose fibers: Effect of coupling agent on mechanical properties, Polymer Processing Society, Dresden.
Kahl, C., Schnieders, J., Heim, H.-P., Sauer, V., 2017. Integration of Electrochromic Devices in Plastic Parts by Injection Moulding , Polymer Processing Society, Dresden.
Sauer, V., Wolff, S., Schweiger, L., 2017. Electroencephalography (EEG) supported Olfactometry - Current Methods and Future Applications, 19th Conference Odour and Emissions of Plastic Materials, Kassel, Deutschland.
Schlitt, C., Giesen, R.-U., Heim, H.-P., 2017. Influence of The Injection Molding Process On the Peeling Resistance of Thermoplastic/ Silicone Composites, 33rd International Conference of Polymer Processing Society, Cancun.
Giesen, R.-U., Hartung, M., Rüppel, A., Heim, H.-P., 2017. UV-Vorbehandlung für Thermoplaste für das MK-Spritzgießen mit Flüssigsilikon (LSR), 12. ThGOT Thementage Grenz- und Oberflächentechnik, Zeulenroda/Thüringen.
Zarges, J.-C., Feldmann, M., 2017. Fatigue behavior of short fiber bio-based composites for engineering applications, 33rd International Conference of the Polymer Processing Society, Cancun.
Fuchs, J., Heim, H.-P., 2017. Compounds aus vernetzter Stärke,  Möglichkeiten und Potenziale eines Tausendsassas, Potsdam.
Geck, J.-M., Heim, H.-P., Fischer, W., 2017. Flexibles Kunststofffügezentrum für Reibschweißverfahren/Flexible plastics joining centre for friction welding procedures. Joining Plastics. Fügen von Kunststoffen 180–185.
Trütner, M., Jennerich, M., Wetzel, A., Burghardt, T., Heim, H.-P., Sträter, O., Middendorf, B., 2017. Safe Structural Bonding of Ultra-High Performance Concrete. Adhesion Adhesives & Sealants 14, 20–23. https://doi.org/10.1007/s35784-017-0013-1
Bacaicoa Garcia, I., Lütje, M., Sälzer, P., Umbach, C., Brückner-Foit, A., Heim, H.-P., Middendorf, B., 2017. Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure. MP: Materialprüfung / Materials Testing 59, 829–836. https://doi.org/10.3139/120.111076
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Influence of different types and amounts of crosslinking agent on the curing process of silicone rubber. Zeitschrift Kunststofftechnik 4, 233–253. https://doi.org/10.3139/O999.02042017
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Mechanical Properties of Polydimethylsiloxane as a Function of the Amount and Type of Crosslinking Agent. International Polymer Processing 32, 337–342. https://doi.org/10.3139/217.3334
Zarges, J.-C., Minkley, D., Heim, H.-P., Feldmann, M., 2017. Fracture toughness of injection molded, man-made cellulose fiber reinforced polypropylene. Composites Part A: Applied Science and Manufacturing 98, 147–158. https://doi.org/10.1016/j.compositesa.2017.03.022
Geck, J.-M., Jarka, S., Heim, H.-P., 2017. Investigations on Tightness of Polymer-Metal Hybrids in Environments with Thermal, Media, and Mechanical Loads. International Polymer Processing 32, 467–473. https://doi.org/10.3139/217.3376
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2017. Analysis of the extrusion process of silicone rubber, PPS Europe Africa Conference, Dresden.
Heim, H.-P., Jarka, S., Geck, J.-M., 2017. Flexible Assembly Machine Combines Multiple Plastics Joining Processes. Assembly 60, 46–51.
Marl, S., Giesen, R.-U., Heim, H.-P., 2017. Results of Mullins Experiment to compare stress softening of different types of liquid silicone rubber, 33rd International Conference of Polymer Processing Society, Cancun, Mexico.

2016

Zarges, J.-C., Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Determining Viscosity Directly in the Injection Molding Process: In-Line Rheometer for Natural-Fiber-Reinforced Plastics. Kunststoffe international 106–109.
Heim, H.-P., Jarka, S., Geck, J.-M., 2016. Joining Investigations of Polymer-Metal-Hybrids for Permanantly Non-Leaking Applications, Society of Plastics Engineers, ANTEC 2016, 1351-1355.
Trütner, M., Freisinger-Schadow, S., Wetzel, A., Heim, H.-P., Middendorf, B., 2016. Microstrctural investigations of the interface of ultra- high performance concrete and mineral adhesive using high resolution-CT analysis, ICCCM 2016 – 2nd International Conference on the Chemistry of Construction Materials, GDCh-Monographie Vol. 50, Gesellschaft Deutscher Chemiker e.V.
Sauer, V., Faulhaber, K., Schnieders, J., Heim, H.-P., 2016. Back-Inejctions moulding of plastic based electrochromic system, 12th International Meeting on Electrochromism, Delft, Netherlands.
Feldmann, M., Heim, H.-P., Zarges, J.-C., 2016. Influence of the process parameters on the mechanical properties of engineering biocomposites using a twin-screw extruder. Composites Part A: Applied Science and Manufacturing 83, 113–119. https://doi.org/10.1016/j.compositesa.2015.03.028
Heim, H.-P., 2016. Specialized injection molding techniques. Elsevier, William Andrew, Amsterdam [u.a.].
Hartung, M., Giesen, R.-U., Heim, H.-P., 2016. The Influence of the Process Parameters in Multi-Component Injection Molding on the Composite Adhesion of the Material Combination PA6 with Self-Adhesive Liquid Silicone Rubber (LSR), 32nd International Conference of the Polymer Processing Society, Lyon, France.
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2016. Characterizing the Rheological Behavior of Liquid Silicone Rubber Using a High Pressure Capillary Rheometer, Society of Plastics Engineers, ANTEC 2016, 104-108.
Sauer, V., 2016. Struktur-Eigenschafts-Beziehung von Mischungen aus thermoplastischem PMMA mit vernetzten PMMA-Kolloiden. Kassel University Press, Kassel.
Tromm, M., Heim, H.-P., 2016. Injection molded components with functionally graded foam structures - Procedure and essential results. Journal of Cellular Plastics 52, 299–319. https://doi.org/10.1177/0021955X15570077
Rüppel, A., Aßmann, C., Giesen, R.-U., Heim, H.-P., 2016. Investigation of the Mechanical and Olfactory Properties of PP with Wood and PET Fibers for Automobile Application Fields, 18th Conference Odour and Emissions of Plastic Materials, Kassel, Germany 
Hartung, M., Giesen, R.-U., 2016. UV light - the ideal pretreatment method for LSR-Thermoplastic composites, Silicone Elastomers World Summit, Cologne.
Schlitt, C., Hartung, M., Rüppel, A., Giesen, R.-U., Heim, H.-P., 2016. Multicomponent Injection Molding Of Thermoplastics And Liquid Silicone Rubber (LSR) - Either Cured By Heat Or UV Light , ANTEC 2016, Society of Plastic Engineers, Indianapolis, USA.
Verheyen, F., Aßmann, C., Fahlbusch, R., Giesen, R.-U., Heim, H.-P., 2016. Analyzing the curing-process of liquid silicone rubber in respect of emissions and mechanical properties, 18th Conference Odour and Emissions, Kassel, Germany.
Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Effects of Particle Characteristics on the Mechanical Properties of Wood-Plastic Composites, 32nd International Conference of the Polymer Processing Society, Lyon, France.
Trütner, M., Jennerich, M., Wetzel, A., Burghardt, T., Sträter, O., Heim, H.-P., Middendorf, B., 2016. Ultrahochfeste Betonbauteile qualitätssicher fügen. adhäsion KLEBEN & DICHTEN 60, 40–43. https://doi.org/10.1007/s35145-016-0077-0
Verheyen, F., Giesen, R.-U., Heim, H.-P., 2016. Influence of the post-curing process on liquid silicone rubber, 31st International Conference on the Polymer Processing Society, Melville.
Rüppel, A., Giesen, R.-U., Heim, H.-P., 2016. The Adhesion of LSR Polycarbonate Composites after Various Secondary Treatment Processes, 32th Polymer Processing Society, Lyon,France.
Tromm, M., Heim, H.-P., 2016. High-Pressure Foam Injection Molding With Local Core-Back Method – Simulation Approach, SPE TPM&F Division & Pacific Northwest Section, SPE FOAMS® 2016.
Giesen, R.-U., Hartung, M., Heim, H.-P., Rüppel, A., 2016. Patentschrift - Verfahren zur Haftverbesserung von Silikon auf einer thermoplastischen Oberfläche. Institut für Werkstofftechnik - Fachgebiet Kunstofftechnik, Kassel.
Zarges, J.-C., Sälzer, P., Feldmann, M., Heim, H.-P., 2016. Viskositätsbestimmung direkt im Spritzgießprozess: In-Line-Rheometer für Naturfaserverstärkte Kunststoffe. Kunststoffe 144–148.
Fuchs, J., Feldmann, M., Ziesler, J., Heim, H.-P., 2016. Biokunststoffe in Form bringen. Kunststoffe 106, 74–76.
Rüppel, A., Vajen, K., Jähnig, D., Heim, H.-P., 2016. Neuartige Konzepte für interne Wärmeübertrager mit innovativen Materialien, in: Solpol (Hrsg.), 26. Symposium Thermische Solarenergie. Bad Staffelstein, S. TBD.
Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Rüppel, A., Sauer, V., Kleinhans, S., Heim, H.-P., 2016. 8 - Lignin Reinforcement in Bioplastic Composites, Lignin in Polymer Composites, Matthew Deans, Elsevier Inc, 135-165 
Heim, H.-P., Jarka, S., Geck, J.-M., 2016. Development of a Flexible Polymer Joining Center Capable of Performing Multiple Joining Processes Using Different Methods in a Single Cycle, Society of Plastics Engineers, ANTEC 2016, 1325-1328.

2015

Feldmann, M., Jarka, S., Heim, H.-P., 2015. Patentschrift - Tiefziehfähige Folie und Verfahren zur Herstellung einer tiefziehfähigen Folie. Institut für Werkstofftechnik - Fachgebiet Kunstofftechnik, Kassel.
Mamun, M.A.A., Nikousaleh, M.A., Heim, H.-P., 2015. Rheological, Mechanical, Environmental Stress Corrosion and Gamma Resistance Properties of Semi-Crystalline PLA: Effect of Catalysts on the Reactivity of a Chain Extender. Journal of Biobased Materials and Bioenergy 9, 285–294. https://doi.org/10.1166/jbmb.2015.1523
Schubert, C., Rüppel, A., Nendel, K., Heim, H.-P., 2015. Beständigkeit von Gleich- und Mischmaterialschweißverbindungen aus Wood Plastic Composite (WPC). Holztechnologie 56, 24–30.
Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2015. Planning and optimisation of manufacturing process chains for functionally graded components-part 2: Case study on self-reinforced thermoplastic composites. Production Engineering 9, 405–416. https://doi.org/10.1007/s11740-015-0610-2
Feldmann, M., Heim, H.-P., 2015. Welt der Kunststoffe: Bio...aber sicher!? Chemie{&}more 2–3.
Heim, H.-P., Sauer, V., Mieth, F., 2015. Changeable Thermal Management for LED-Lighting, Society of Plastics Engineers, ANTEC 2015, Newtown, S. 727-731.
Muhammad, Y.H., Ahmad, S.H., Abu Bakar, M.A., Mamun, M.A.A., Heim, H.-P., 2015. Mechanical properties of hybrid glass/kenaf fibre-reinforced epoxy composite with matrix modification using liquid epoxidised natural rubber. Journal of Reinforced Plastics and Composites 34, 896–906. https://doi.org/10.1177/0731684415584431
Ries, A., 2015. Thermo-mechanische Gradierung eigenverstärkter Polypropylen-Composite. kassel university press, Kassel. https://doi.org/10.19211/kup9783737650458
Mamun, M.A.A., Nikousaleh, M., Feldmann, M., Rüppel, A., Sauer, V., Kleinhans, S., Heim, H.-P., 2015. Lignin Reinforcement in Bioplastic Composites, Lignin in polymer composites, William Andrew, Norwich, S. 153-165,  https://doi.org/10.1016/B978-0-323-35565-0.00008-4
Heim, H.-P., Rohde, B., 2015. Self-Reinforcing Thermoplastic Composites. Plastics Age 61, 83–90.
Sälzer, P., Feldmann, M., Heim, H.-P., 2015. Wood-Polypropylene-Composites: Influence of Particle Size and Shape on Mechanical Properties, Baltic Polymer Symposium 2015, Riga.
Sauer, V., Heim, H.-P., Mieth, F., 2015. Influence of Different Assembling Methods of Aluminium-Plastic-Joinings to the Thermal Management for LED-Lighting, 31st International Conference Polymer Processing Society, Jeju-do, Südkorea.
Heim, H.-P., Feldmann, M., Fuchs, J., 2015. (Schaum-)Spritzguss von Stärkeblends - Verfahren und Eigenschaften, 7. Biopolymer-Kolloquium, Berlin, Germany.
Faulhaber, K., Sauer, V., Gövert, S., Schnieders, J., Heim, H.-P., 2015. Integration of Electrochromic Devices by the Injection Moulding Process, Baltic Polymer Symposium 2015,Riga.
Feldmann, M., Mamun, M.A.A., Zarges, J.-C., Heim, H.-P., 2015. Prozess- und Materialoptimierung von Biokunststoffen- und -compositen, 7. Biopolymer-Kolloquium, Berlin, Germany.
Fuchs, J., Feldmann, M., Heim, H.-P., 2015. Modification of Starch-Blends with PLA by using a novel one-step Compounding Process, 23rd BEPS 2015, Karlsruhe.
Giesen, R.-U., Verheyen, F., Methe, D., Bogedale, L., Heim, H.-P., 2015. Filled Liquid Silicone Rubber (LSR) to increase mechanical and physical properties, Polymer Processing Society Conference, Graz.
Giesen, R.-U., Adam, M., Methe, D., Heim, H.-P., 2015. TPEs und leitfähige Polymere für dielektrisch elektroaktive Polymere (dEAP), 8. Automobil- Kunststoff- Pumpen Forum, Spitzingsee.
Zarges, J.-C., Feldmann, M., Heim, H.-P., 2015. In-Line Rheological Characterisation of Natural Fibre Reinforced Composites During the Injection Moulding Process, Polymer Processing Society, Graz.
Kleinhans, S., Feldmann, M., Feldmann, M., Mamun, M.A.A., Sauer, V., 2015. Zur Geruchs- und Emissionsmessung von thermoplastbasierten Lignin-Blends, 17. Workshop of Odour and Emissions of Plastic Materials, Kassel, Germany.
Mamun, A., Heim, H.-P., Bledzki, A., 2015. The use of maize, oat, barley and rye fibres as reinforcements in composites. Biofiber Reinforcement in Composite Materials 454–487. https://doi.org/10.1533/9781782421276.4.454
Mamun, M.A.A., Heim, H.-P., Faruk, O., Bledzki, A., 2015. The use of banana and abaca fibres as reinforcements in composites. Biofiber Reinforcement in Composite Materials 236–272. https://doi.org/10.1533/9781782421276.2.236
Feldmann, M., 2015. The Effect of Different Melt Temperatures during Injection Moulding on the Mechanical Properties of Biocomposites, 31st International Conference of Polymer Processing Society, Jeju Island, Korea.
Ganster, J., Feldmann, M., 2015. Renaissance der Biopolymere - Nachwachsende Rohstoffe für den Kunststoffsektor. Chemie&more 01, 12–15.

2014

Heim, H.-P., Rüppel, A., Mamun, M.A.A., 2014. Hybridwerkstoffe: Leichter mit maßgeschneiderten Verbunden / Hybrid materials. Kunststoffe 104, 87–91.
Schlitt, C., 2014. Silicone In Medical Devices - Essentials For Safe Infusion Therapy, Silicone Elastomers World Summit 2014, Wien, Österreich.
Heim, H.-P., Sauer, V., Mieth, F., 2014. Funktionenintegrierende Fertigung, VDI Tagung Spritzgießen, Oberflächen und Verfahrensoptimierung im Fokus, Baden.
Heim, H.-P., Sauer, V., Mieth, F., 2014. Assessment of the changeability of plastics processing systems, ANTEC 2014, Society of Plastic Engineers, Las Vegas,USA.
Mamun, M.A.A., Feldmann, M., Heim, H.-P., 2014. Geruch und Emissionen von Naturfaser-Verbundwerkstoffen. The odour and emission from natural fibre composites, 16. Workshop: Geruch und Emissionen bei Kunststoffen, Kassel, Germany.
Zarges, J.-C., Feldmann, M., Heim, H.-P., 2014. Influence of the compounding process on bio-based polyamides with cellulosic fibers, 30th Polymer Processing Society, Cleveland/Ohio.
Heim, H.-P., Mamun, M.A.A., 2014. Modification of Semi-Crystalline PLA: Impact, Tensile and Thermal Properties. Journal of Biobased Materials and Bioenergy 8, 292–298. https://doi.org/10.1166/jbmb.2014.1437
Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Badawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 2). Kunststoffe 104, 72–78.
Giesen, R.-U., Adam, M., Heim, H.-P., 2014. Manufacturing dielectric electroactive polymers (DEAP) by using thermoplastic elastomers (TPE) and conductive polymers, 30th Polymer Processing Society, Cleveland/Ohio.
Giesen, R.-U., Heim, H.-P., 2014. Kooperation zwischen Praxis und Wissenschaft - Verarbeitung von Thermoplasten und Elastomeren für die Medizintechnik,VDMA AG Medizintechnik, Frankfurt (Main).
Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Baldawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1). Kunststoffe international / Magazine for Plastics 104, 31–35.
Feldmann, M., Verheyen, F., Heim, H.-P., 2014. Continuous-fiber-reinforced engineering thermoplastics from renewable raw materials - Processing and Properties, 2nd Bioplasic Materials, Chicago/Ill.
Rohde, B., Wibbeke, A., Heim, H.-P., Schöppner, V., 2014. The Manufacture of Hot-Compacted Layered Composite Systems Made of Oriented Semifinished PP-Films. ISRN Polymer Science 2014, 1–9. https://doi.org/10.1155/2014/601741
Schubert, C., Rüppel, A., Clauß, B., Nendel, K., Heim, H.-P., 2014. Untersuchung zur Schweißbarkeit bei der Herstellung von Hybridbauteilen aus naturfaser-, holzfaser- und polymerfaserverstärkten Kunststoffen in Abhängigkeit von Rezeptur und äußeren Einflussfaktoren: Abschlussbericht IGF Vorhaben 17396BG. Universität Kassel, Kassel.
Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H., Mahnken, R., Dammann, C., Wünsch, O., Al-Badawi, A., Rohde, B., Brückner-Foit, A., Gausemeier, J., Gräßler, I., Petersen, M., 2014. Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 1). Kunststoffe 104, 35–39.
Faulhaber, K., Sauer, V., Gövert, S., Schnieders, J., Heim, H.-P., 2014. The Effects of UV-ozone treatment on the Improvement of the Wettability of ITO-coated Plastic, International Meeting on Electrochromism, Taipei.
Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2014. A framework for the computer-aided planning and optimisation of manufacturing processes for components with functional graded properties, The 29th International Conference of the Polymer Processing Society. American Institute of Physics, College Park, S. 762-765. https://doi.org/10.1063/1.4873887
Giesen, R.-U., Heim, H.-P., 2014. Polymer Application Center UNIpace Of The University of Kassel, Silicone Elastomers 2014, Wien.
Giesen, R.-U., Adam, M., Heim, H.-P., 2014. Dielektrisch elektroaktive Polymere (dEAP) auf Basis von thermoplastischen Elastomeren (TPE). Zeitschrift Kunststofftechnik/Journal of Plastics Technology 10, 29–48.
Biermann, D., Rohde, B., Hess, S., Wagner, T., Ries, A., Wibbeke, A., Heim, H.-P., 2014. Optimization of thermomechanical processes for the functional gradation of polymers by means of advanced empirical modeling techniques, The 29th International Conference of the Polymer Processing Society. American Institute of Physics, College Park, S. 766-770. https://doi.org/10.1063/1.4873888
Heim, H.-P., Rohde, B., Ries, A., 2014. Morphology-Property-Relationship of Thermo-Mechanically Graded Self-Reinforced Polypropylene-Composites, 29th International Conference of the Polymer Processing Society, American Institute of Physics, College Park, S. 776-779. https://doi.org/10.1063/1.4873890
Heim, H.-P., Rüppel, A., 2014. Hybrid Composite Materials Made of Polypropylene with Wood and Polyethylene Terephthalate Fibers (Plastics in Building & Construction), Society of Plastics Engineers, ANTEC 2014, Newtown, S. 2039-2043.
Tromm, M., Heim, H.-P., 2014. Formation of morphology as a function of process control by foam injection molding of a functionally graded component, Society of Plastics Engineers, ANTEC 2014, Newtown, S. 1551-1556.
Feldmann, M., Heim, H.-P., 2014. Herstellung, Eigenschaften und Anwendungspotentiale von Naturfaserverstärkten Kunststoffen, Fortschritte in der Kunststofftechnik- Theorie und Praxis,16. Fachtagung, Osnabrück.
Heim, H.-P., Ries, A., 2014. The Gradation of Material Structures with the Aim of Property Optimization of Plastic Products, 29th International Conference of the Polymer Processing Society, American Institute of Physics, Nürnberg.
Zarges, J.-C., Feldmann, M., Heim, H.-P., 2014. Einfluss der Compoundierung auf die Eigenschaften von biobasierten Polyamiden mit Cellulosefaserverstärkung, naro.tech - 10. Internationales Symposium, Erfurt.
Heim, H.-P., Rohde, B., 2014. Self-Reinforced Materials: Manufacturing, Properties and their Potential for Lightweight Composites, Asian Workshop on Polymer Processing Annual Conference (AWPP), Kenting, Taiwan.
Rüppel, A., Verheyen, F., Giesen, R.-U., Heim, H.-P., 2014. Analysis and comparison of different types of liquid silicone rubber with reference to process parameter, Silicone Elastomer World Summit, Wien.

2013

Schnieders, J., Gövert, S., Heim, H.-P., Giesen, R.-U., 2013. Abschlussbericht zum BMBF-Forschungsprojekt.Intelligente Kunststoff-Verscheibung: Innovative Kombination von Technologien zur Herstellung funktionaler 3D-Kunststoff-Verscheibungen für eine energieeffiziente Nutzung. 3 Pi Consulting und Management GmbH, Universität Kassel, Institute für Werkstofftechnik.
Mamun, M.A.A., Heim, H.-P., Beg, M.D.H., Kim, T.S., Ahmad, S.H., 2013. PLA composites with enzyme modified oil palm fibre. Composites Part A 53, 160–167.
Fuchs, J., Feldmann, M., Heim, H.-P., 2013. Konstruktionsschäume auf Stärkebasis, 6. Biokunststoffe, Duisburg.
Brückner-Foit, A., Matheis, B., Skotarek, C., Zeismann, F., Ries, A., Rohde, B., Heim, H.-P., 2013. Lokale Verformungen in einem eigenverstärkten Verbundwerkstoff. - Sitzung des Arbeitskreis Mikrostrukturmechanik im Fachausschuss Computersimulation der DGM, Osnabrück.
Heim, H.-P., Giesen, R.-U., 2013. An Electrochromic System Integrated in a Polycarbonate Pane for an Automotive Application, Advances in Plastic Technology, Sosnowiec,Poland.
Schlitt, C., 2013. Silicone In Medical Technology - Requirements, Limitations And Perspectives, Rubber Meets Science, Aachen, Deutschland.
Bledzki, A., Jaszkiewicz, A., Feldmann, M., Urbaniak, M., 2013. „Cellulosefasern“ ersetzen Glasfasern, Konferencja Materiały Polimerowe, Pomerania - Plast, Miedzyzdroje, Polen.
Bledzki, A., Jaszkiewicz, A., Feldmann, M., Berger, C., Urbaniak, M., 2013. Entwicklungstrends bei multifunktionalen Biocompositen, 16. Internationales Dresdner Leichtbausymposium, Dresden, Deutschland.
Homberg, W., Biermann, D., Heim, H.-P., 2013. Functionally graded materials in industrial mass production. Fundamentals. Verlag Wissenschaftliche Scripten, Auerbach.
Fuchs, J., 2013. Biokunststoffe werden erwachsen. Kunststoffe 18–19.
Biermann, D., Heim, H.-P., Rohde, B., Tiffe, M., Ries, A., Zabel, A., Saleski, N., 2013. Examination of the machining behaviour of self-reinforced, thermo-mechnically graded polypropylene composites, in: Society for the Advancement of Material and Process Engineering, Proceedings of Advanced Composites on its Way to Industrialization, SEICO, SAMPE Europe International Technical Conference, 34. SAMPE Europe Conferences, Riehen, S. 139-144.
Heim, H.-P., Desjean, A., 2013. Climatic Ageing of Components of Polymer Based Electrochromic Devices. International Polymer Processing 28, 256–260. https://doi.org/10.3139/217.2657
Heim, H.-P., Rohde, B., Ries, A., 2013. Thermo-mechanischer Umformprozess eigenverstärkter thermoplastischer Gradientenwerkstoffe.TRR 30: Prozessintegrierte Herstellung funktional gradierter Strukturen auf der Grundlage thermo-mechanisch gekoppelter Phänomene.
Heim, H.-P., Rohde, B., Ries, A., Faulhaber, K., Saleski, N., Hohmann, C., Salzmann, C., 2013. Thermo-Mechanical Match Mould Forming of Self-Reinforced Thermoplastic Gradient Materials. Functionally graded materials in industrial mass production, Verl. Wiss. Scripten, Auerbach, S. 97-112.
Heim, H.-P., Jarka, S., Fischer, W., 2013. Rotatives Vibrationsschweißen - ein neuartiges Reibschweißverfahren. Joining Plastics 65, 176–181.
Heim, H.-P., Tillmann, W., Ries, A., Sievers, N., Rohde, B., Zielke, R., 2013. Visualisation of the degrees of compaction of self-reinforced polypropylene composites by means of ultrasonic testing. Journal of Plastics Technology / Zeitschrift Kunststofftechnik 275–294.
Fuchs, J., Feldmann, M., Heim, H.-P., 2013. Natürlich und fest anbinden. Kunststoffe 100–103.
Schöppner, V., Heim, H.-P., Wibbeke, A., Ries, A., Rohde, B., 2013. Graded Structures in Polymers, Functionally Graded Materials in Industrial Mass Production | Fundamentals. Verl. Wiss. Scripten, Auerbach, S. 11-42.
Heim, H.-P., Tan, S.K., Ahmad, S.H., Chia, C.H., Mamun, A., 2013. A Comparison Study of Liquid Natural Rubber (LNR) and Liquid Epoxidized Natural Rubber (LENR) as the Toughening Agent for Epoxy. American Journal of Materials Science 3, 55–61.
Schneider, M., Michels, R., Pipich, V., Goerigk, G., Sauer, V., Heim, H.-P., Huber, K., 2013. Morphology of Blends with Cross-Linked PMMA Microgels and Linear PMMA Chains. Macromolecules 46, 9091–9103. https://doi.org/10.1021/ma401889k
Jarka, S., Heim, H.-P., Fischer, W., 2013. Development of a Radian Friction Welding Machine Using the Circular Process with Limited Rotational Motion, Society of Plastic Engineers, 71st annual technical conference of the Society of Plastics Engineers (ANTEC 2013). Brookfield, S. 738-742.
Heim, H.-P., Biermann, D., Homberg, W., 2013. Functionally graded materials in industrial mass production. Volume 2, Verl. Wiss. Scripten, Auerbach.
Mamun, M.A.A., Heim, H.-P., Beg, D.H., Kim, T.S., Ahmad, S.H., 2013. PLA and PP composites with enzyme modified oil palm fibre: A comparative study. Composites Part A: Applied Science and Manufacturing 53, 160–167. https://doi.org/10.1016/j.compositesa.2013.06.010
Hess, S., Ries, A., Kersting, P., Heim, H.-P., 2013. Efficient Spatial and Temporal Modelling of Material Temperatures Within Self-Reinforced Polypropylene Sheets During IR Radiation. Procedia CIRP 9, 49–54. https://doi.org/10.1016/j.procir.2013.06.167

2012

Heim, H.-P., Ries, A., Rohde, B., 2012. Thermomechanische Gradierung von eigenverstärkten Thermoplastverbunden, BASF, Ludwigshafen.
Heim, H.-P., Ries, A., Rohde, B., 2012. Partially Resolved Characterization of Thermo-Mechanically Graded Self-Reinforced Polypropylene Composites, 28th International Conference of the Polymer Processing Society, Pattaya, Thailand.
Heim, H.-P., Geminger, T., 2012. Composite properties of a plastic-metal hybrid , PPS Americas Conference 2012, Niagara Falls, Canada.
Grigalovica, A., Bartule, M., Zicans, J., Meri, R.M., Heim, H.-P., Berger, C., 2012. Relaxation properties of polyoxymethylene and ethylene-octene copolymer blend in solid and melt states. Proceedings of the Estonian Academy of Sciences 61, 200–206. https://doi.org/10.3176/proc.2012.3.09
Mamun, M.A.A., Heim, H.-P., 2012. Optimization of chain extender reactivity and upgrading of PLA properties using various additives, BEPS, Denton, Texas.
Gövert, S., Heim, H.-P., Jarka, S., Tromm, M., Schnieders, J., 2012. Pull and Foam-Injection moulding method: Foamed ribs for stiffening plane components, Society of Plastics Engineers, ANTEC 2012. Newtown, S. 2477-2480.
Sauer, V., Heim, H.-P., Schneider, M., Huber, K., 2012. Influence of particle characteristics and processing on material behaviour of a PMMA-Colloid-Compound, Polymer Processing Society Americas, Niagara Falls, Kanada.
Heim, H.-P., Ries, A., Rohde, B., 2012. Mechanical characterisation of compression moulded self-reinforced polypropylene composites, Baltic Polymer Symposium 2012, Liepaja,Latvia.
Heim, H.-P., Jarka, S., 2012. Development of a radian friction welding machine using the circular process with limited rotational motion, Baltic Polymer Symposium 2012, Liepaja, Latvia.
Heim, H.-P., Hohmann, C., Faulhaber, K., Rohde, B., 2012. Development of a Moulding Tool Concept for the Manufacture of Self-reinforced Thermoplastic Gradient Materials. - 1st International Conference on Thermo-mechanically Graded Materials, Kassel, Deutschland.
Berger, C., Feldmann, M., Mamun, M.A.A., Heim, H.-P., 2012. Biokunststoffe-Potenziale und Chancen  Kunstoffe in OWL, IHK, Bielefeld.
Feldmann, M., Bledzki, A., Heim, H.-P., 2012. Prospects of Bio-based Polymers and their Composites, Baltic Polymer Symposium (BPS) 2012, Liepaja/ Latvia.
Giesen, R.-U., Heim, H.-P., 2012. Forming of Electrochromic Plastic Panes, IME, Holland,USA.
Tromm, M., Heim, H.-P., 2012. Pull and Foam Method: First Investigations with chemical and physical blowing agents. FOAMS 2012 , 10th International Conference on Foam Materials & Technology. Curran, Red Hook, NY, S. 35-40.
Heim, H.-P., Desjean, A., 2012. Characterization of the thermal ageing of electrochromic devices, the European Materials Research Society (E-MRS), Frankreich, Strasbourg.
Heim, H.-P., Englich, J., Reupert, A., Ries, A., 2012. Lightweight hinge made of Textiles, 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, Germany.
Giesen, R.-U., Heim, H.-P., Gövert, S., Schnieders, J., 2012. Regelbare Transparenz: Kunststoffscheiben clever abdunkeln. Kunststoffe 92–95.
Sievers, N., Tillmann, W., Melchers, C., Zielke, R., Ries, A., Heim, H.-P., 2012. Evaluation of nondestructive methods to characterize self-reinforced polypropylene composites, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 253-258.
Heim, H.-P., Schöppner, V., Wibbeke, A., Ries, A., 2012. Herstellung und Heißkompaktierung von thermoplastischen Folienhalbzeugen. Unverstreckte und verstreckte Polypropylen- und Polycarbonattypen im Vergleich, TRR 30: Prozessintegrierte Herstellung funktional gradierter Strukturen auf der Grundlage thermo-mechanisch gekoppelter Phänomene, Siegsdorf.
Heim, H.-P., Rohde, B., Ries, A., 2012. Influence of the Process Conditions on the Morphology-Property-Relationship of Self-Reinforced PP-Composites, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 247-252.
Heim, H.-P., Bledzki, A., Rohleder, M., Tromm, M., 2012. Formation of foam structures and influence of processing procedure in foam injection moulding of thermoplastic materials, Cellular Materials ( CELLMAT 2012), Dresden.
Heim, H.-P., Heim, H.-P., Bledzki, A., Rohleder, M., Tromm, M., 2012. Thermo-Mechanically Graded Injection Moulded Microcellular Foams, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 231-240.
Heim, H.-P., Lieven, N., Ries, A., Sennhenn, D., 2012. Technologievorstellung eines innovativen Leichtbau-Scharniers, 2. Möbel-Leichtbau-Symposium der Hochschule Ostwestfalen-Lippe, Lemgo.
Heim, H.-P., Rohde, B., Ries, A., 2012. Morphological Examinations of Self-Reinforced Polypropylene Composites, Le SEICO 2012 - SAMPE EUROPE 33rd International Technical Conference. SAMPE Europe Conferences and Printed by Curren Associates, Basel and Red Hook, NY, S. 382-287.
Heim, H.-P., Lieven, N., Ries, A., Sennhenn, D., 2012. Scharnierelement, hergestellt auf Basis mindestens eines Flächengebildes und Verfahren zur Herstellung eines Scharnierelements auf Basis mindestens eines Flächengebildes. Deutsches Patent- und Markenamt, Kassel.
Heim, H.-P., Desjean, A., 2012. Ageing of polymer-based electrochromic devices, Polymer Processing Society Americas, Kanada, Nigara Falls.
Feldmann, M., Berger, C., Mamun, A.A., Heim, H.-P., 2012. Mut zur „grünen“ Lücke. Kunststoffe 28–32.
Bledzki, A., Heim, H.-P., Paßmann, D., Ries, A., 2012. Manufacturing of Self-Reinforced All-PP Composites, Synthetic polymer-polymer composites. Hanser, Munich and Cincinnati, S. 719-738.
Desjean, A., Heim, H.-P., 2012. Influence of humidity exposure and mechanical ageing in electrochromic devices, LOPE-C, München.
Biermann, D., Gausemeier, J., Heim, H.-P., Hess, S., Petersen, M., Ries, A., Wagner, T., 2012. Computer-Aided Planning and Optimization of Manufacturing Processes for Functional Graded Components, 1st International Conference on Thermo-Mechanically Graded Materials. Verlag Wissenschaftliche Scripten, Auerbach, S. 195-200.
Feldmann, M., Mammun, A.A., Bledzki, A., Heim, H.-P., 2012. Bio-based polyamides with innovative fibers for engineering parts: Materials-Processing-Characterization-Applications, Society of Plastics Engineers,  ANTEC 2012 Plastics: Annual Technical Conference Proceeding. Newtown, Connecticut, S. 121-125.
Bledzki, A., Heim, H.-P., Rohleder, M., Schaub, S., 2012. Falling weight impact behaviour of polycarbonate and microcellular polycarbonates foams, Society of Plastics Engineers,  ANTEC 2012,  Annual Technical Conference Proceeding. Newtown, Conn, S. 2399-2404.
Feldmann, M., Bledzki, A., Jaszkiewicz, A., Ossadnik, S., 2012. Method for the production of a fiber-reinforced thermoplastic polymer and extrusion die and device for the temperature control a fiber strand impregnated with a polymer melt. Universität Kassel, Kassel.
Feldmann, M., Berger, C., Bledzki, A., Heim, H.-P., 2012. Cellulose als Verstärkungsfaser für technische Biopolymere, 5. Biokunststoffe, Prozesse und Eigenschaften, Hannover.

2011

Ries, A., Rohde, B., Heim, H.-P., 2011. Thermo-mechanical Gradation of Self-reinforced Polypropylene Composites using Compression Moulding Technology,  APST-2, Advances in Polymer Science and Technology,  Linz, S. 108.
Heim, H.-P., Ries, A., Bledzki, A., 2011. Challenge of Functional Gradation of Self-reinforced Polypropylene Composites, SAMPE Europe SEICO 11, 32th International Technical Conference & Forum. SAMPE Europe, Paris, S. 148-155.
Heim, H.-P., Schöppner, V., Ries, A., Wibbeke, A., 2011. Hot-Compaction of self-reinforced polycarbonate films, PPS-27, 27th World Congress of the Polymer Processing Society. Curran Associates, Marrakech, S. 148-155.

2010

Bledzki, A., Ries, A., Paßmann, D., Heim, H.-P., 2010. Influence of the Compression Molding Process on Impact Behavior, ANTEC 2010 - Proceedings of the 68th Annual Technical Conference & Exhibition. Society of Plastics Engineers, Orlando, S. 369-373.
Bledzki, A., Ries, A., Paßmann, D., Heim, H.-P., 2010. Impact Behaviour of Property Graded Self-reinforced Polypropylene Composites, SAMPE Europe SEICO 10, 31st Technical Conference & Exhibition, Paris.
Schmidt, M., Freisinger-Schadow, S., Heim, H.-P., Mihm, K.-M., Dilger, K., Böhm, S., Wisner, G., 2010. Einsatzmöglichkeiten der Klebtechnik zum Fügen von ultra-hochfestem Beton im konstruktiven Betonbau. Schweißen und Schneiden 62, 26–35.
Potente, H., Moritzer, E., Schäfers, M., Heim, H.-P., Plugge, T., Ridder, H., 2010. Advanced investigations for the newly developed special injection molding process: GITBlow, Society of Plastics Engineers, ANTEC 2010, 68th Annual Technical Conference. S. 587-591.
Ludwig, B., Michel, K., Hermann, S., 2010. Modelling chemical and biological reactions during unsaturated flow through sandy soils. Australian Journal of Soil Research 48, 221–230. https://doi.org/10.1071/SR09145
Michel, K., Hermann, S., Ludwig, B., 2010. Modelling chemical and biological reactions during unsaturated flow in silty arable soils. Geoderma 156, 293–301. https://doi.org/10.1016/j.geoderma.2010.02.029

2007

Dose, M., Gruber, C., Grunz, A., Hook, C., Kempf, J.-O., Scharfenberg, G., Sick, B., 2007. Towards an Automated Analysis of Neuroleptics’ Impact on Human Hand Motor Skills, 2007 IEEE Symposium on Computational Intelligence and Bioinformatics and Computational Biology. IEEE, S. 494-501.  https://doi.org/10.1109/CIBCB.2007.4221261