Veröffentlichungen

Veröffentlichungen

  • Bacaicoa, I., Lütje, M., Sälzer, P., Umbach, C., Brückner-Foit, A., Heim, H.-P. & Middendorf, B. (2017). Comparative investigation of two-dimensional imaging methods and X-ray tomography in the characterization of microstructure. Materials Testing, 10/2017 ,DOI: 10.3139/120.111076

  • Bacaicoa, I., Luetje, M., Wicke, M., Geisert, A., Fehlbier, M. & Brueckner-Foit, A. (2017). Characterization of casting defects in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis. Engng. Fract. Mech., DOI: 10.1016/j.engfracmech.2017.03.015

  • Diehl, M., Wicke, M., Shantbraj, P., Roters, F., Brückner-Foit, A. & Raabe, D. (2017). Coupled Crystal Plasticity–Phase Field Fracture Simulation Study on Damage Evolution Around a Void: Pore Shape Versus Crystallographic Orientation. Journal of the Minerals, Metals & Materials Society, 16.03.2017, DOI: doi.org/10.1007/s11837-017-2308-8

  • Fuchs, J., Feldmann, M., Aßmann, C., Vorwerg, W. & Heim, H.-P. (2017). Modification of starch blends with PLA by crosslinking native potato starch in a laboratory mixer. International Polymer Processing.

  • Judt, P.O., Zarges, J.-C., Ricoeur, A., Heim, H.-P. (2017). Anisotropic fracture properties and crack path prediction in glass and cellulose fiber reinforced composites. Engineering Fracture Mechanics, DOI: 10.1016/j.engfracmech.2017.08.027

  • Magnier, A., Scholtes, B. & Niendorf, T. (2017). Analysis of residual stress profiles in plastic materials using the hole drilling method – Influence factors and practical aspects. Polymer Testing, 59, 29-37. DOI: 10.1016/j.polymertesting.2016.12.025

  • Oevermann, T., Saalfeld, S., Scholtes, B., Niendorf, T. (2017). Materials and Process Engineering Aspects of Warm Deep Rolling. International Journal of Microstructure and Materials Properties

  • Oevermann, T., Saalfeld, S., Niendorf, T. & Scholtes, B. (2017). Prozessintegration von induktiver Wärmebehandlung und Festwalzen – Sichere und zuverlässige Komponenten mit hoher Schwingfestigkeit. HTM J. Heat. Treatm. Mat. 72 (2017) 1, 10-18. DOI: 10.3139/105.110311

  • Schmidt, M., Leutbecher, T., Piotrowski, S. & Wiens, U. (2017). The German Guideline for Ultra- High Performance Concrete. AFGC-ACI-fib-RILEM Int. Symposium on Ultra-High Performance Fibre-Reinforced Concrete, UHPFRC 2017, October 2-4, 2017, Montpellier, France (im Druck)

  • Wang, Z. & Ricoeur, A. (2017). Numerical crack path prediction under mixed-mode loading in 1D quasicrystals. Theoretical and Applied Fracture Mechanics, im Druck, DOI:10.1016/j.tafmec.2017.03.013

  • Zarges, J.-C., Minkley, D., Feldmann, M. & Heim, H.-P. (2017). Fracture Toughness of Injection
    Molded, Man-Made Cellulose Fiber Reinforced Polypropylene. Composites Part A: Applied Science and Manufacturing, 98, 147–158.

  • Bacaicoa, I., Luetje, M., Wicke, M., Geisert, A., Zeismann, F., Fehlbier, M. & Brueckner-Foit, A. (2016). 3D Morphology of Al5FeSi inclusions in high Fe-content Al-Si-Cu Alloys. Procedia Structural Integrity, 2, 2269-2276.

  • Bacaicoa, I., Dwivedi, P.K., Luetje, M., Zeismann, F., Brueckner-Foit, A., Geisert, A. & Fehlbier, M. (2016). Effect of non-epuilibrium heat treatments on microstructure and tensile properties of an Al-Si-Cu alloy. Materials Science and Engineering: A, Vol. 673, 562-571, 15. Sep.2016.

  • Feldmann, M. & Verheyen, F. (2016). Impact behaviour of continuous biaxial reinforced composites based on bio-polyamides and man-made cellulose fibres. International Polymer Processing: Vol. 31, No. 2, pp. 198-206.

  • Feldmann, M. (2016). The effects of the injection moulding temperature on the mechanical properties and morphology of polypropylene man-made cellulose fibre composites. Composites Part A: Applied Science and Manufacturing, 87, 146-152.

  • Gellmann, R. & Ricoeur, A. (2016). Continuum damage model for ferroelectric materials andits application to multilayer actuators. Smart Materials and Structures, 25(5), 055045

  • Gundlach, J., Henneberg, D., Scheel, J. & Ricoeur, A. (2016). Microscale-motivated continuum damage simulations of brittle ceramics under thermomechanical loading. Journal of Ceramic Science and Technology, 7(2), 145-154.

  • Jennerich, M., Meyer, K., Arenius, M. & Sträter, O. (2016). Entwicklung und Evaluation eines proaktiven Assistenzsystems zur Unterstützung von Personalhandlungen zur Erhöhung der Prozesssicherheit. Gesellschaft für Arbeitswissenschaft (Hrsg), Verantwortung für die Arbeit der Zukunft, 2016, Aachen

  • Judt, P.O., Ricoeur, A. (2016). A new application of M- and L-integrals for the numerical loading analysis of two interacting cracks. Zeitschrift für angewandte Mathematik und Mechanik, 96, 24-36. doi:10.1002/zamm.201500012

  • Magnier, A., Scholtes, B. & Niendorf, T. (2016). Analysis of residual stress profiles in plastic materials using the hole drilling method - Influence factors and practical aspects. Polymer Testing, DOI: 10.1016/j.polymertesting.2016.12.025

  • Scholtes, B. (2016). Eigenspannungen - die Regel und nicht die Ausnahme. Fortschritte in der
    Werkstoffprüfung für Forschung und Praxis
    , Verlag Stahleisen GmbH Düsseldorf, 1-13. DOI: 978-3-514-00830-5

  • Trütner, M., Jennerich, M., Wetzel, A., Burghardt, T., Sträter, O., Heim, H.-P. & Middendorf, B. (2016). Ultrahochfeste Betonbauteile qualitätssicher fügen. Adhäsion Kleben+Dichten, 12/16, 40- 43.

  • Wang, Z., Scheel, J. & Ricoeur, A. (2016). Mixed-mode crack tip loading and crack deflection in 1D quasicrystals. Applied Physics A, 122, 1041 (12 pages). DOI: 10.1007/s00339-016-0570-1

  • Wicke, M., Luetje, M., Bacaicoa, I. & Brueckner-Foit, A. (2016). Characterization of Casting Pores in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis. Procedia Structural Integrity, 2, 2643-2649.

  • Feldmann, M., Heim, H.-P. & Zarges, J.-C. (2015). Influence of the Process Parameters on the Mechanical Properties of Engineering Biocomposites using a Twin-Screw Extruder. Composites Part A: Applied Science and Manufacturing.

  • Judt, P.O., Ricoeur, A. & Linek, G. (2015). Crack path prediction in rolled aluminium plates with fracture toughness orthotropy and experimental validation. Engineering Fracture Mechanics, 138, 33-48. doi: 10.1016/j. engfracmech. 2015.03.003.

  • Judt, P.O., Ricoeur, A. (2015). Crack growth simulation of multiple cracks systems applying remote contour interaction integrals. Theoretical and Applied Fracture Mechanics, 75, 78-88. doi:10.2016/j.tafmec.2014.11.001

  • Judt, P.O., Ricoeur, A. (2015). Crack path predictions and experiments in plane structures with anisotropic properties and material interfaces. Frattura ed Intigrità Strutturale, 34, 208-2015. doi:10.3221/IGF-ESIS.34.22

  • Wahner, M., Freisinger-Schadow, S., Wetzel, A. & Middendorf, B. (2015). Gluing of high performance concrete with mineral adhesive. Proceedings to 4th HiPerMat, Kassel, Germany, 2016, in print (Peer reviewed)

Vorträge/Tagungsbeiträge

  • Bacaico, I., Luetje, M., Wicke, M., Geisert, A., Zeismann, F., Fehlbier, M. & Brueckner-Foit, A. (2016). 3D Morphology of Al5FeSi inclusions in high Fe-content Al-Si-Cu Alloys. Procedia Structural Integrity: Vol. 2, 2016, pp. 2269-2276, 21st European Conference on Fracture, ECF21, 20-24 Jun 2016, Catania, Italy.

  • Bacaicoa, I., Luetje, M., Geisert, A., Fehlbier, M. & Brückner-Foit, A. (2017). Gussdefekte, Gefügeausbildung und mechanischen Eigenschaften einer recycelten AlSi9Cu3(Fe)-Gusslegierung. Deutscher Gießereitag, Bundesverband der Deutschen Gießerei-Industrie, 18.05.2017

  • Brueckner-Foit, A., Luetje, M., Bacaicoa, I., Geisert, A., Fehlbier, M. & Jennerich, M. (2017). On the role of internaI defects in the fatigue damage process of cast alloys. Third International Symposium on Fatigue Design and Material Defects, 19.-22.09.2017, Lecco, Italy

  • Feldmann, M. (2017). Stoffliche Nutzung von Holz in der Kunststofftechnik – Ein zuverlässiger Rohstoff für die Zukunft!?. Zweiter Workshop „Bioökonomie in Hessen“, 30.3.2017, Kassel

  • Judt P., Ricoeur A. (2017). Efficient crack path prediction in 2D and 3D structures applying a material forces approach. 14th International Conference on Fracture, 18-23 Juni, 2017, Rhodes, Greece

  • Judt P., Ricoeur A. (2017). Crack path predictions in anisotropic structures considering residual stresses. 88. GAMM-Tagung, Weimar, 6-10 März ,2017, Deutschland

  • Judt, P.O., Ricoeur, A., Saalfeld, S. & Scholtes, B. (2017). Simulation von Risspfaden in anisotropen Strukturen mit Eigenspannungen und nicht- proportionaler Beanspruchung. DVM Tagung „Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen“, 217-226, 14.-15.02.2017, Mittweida

  • Meyer, K., Sälzer, P., Jennerich, M. & Sträter, O. (2017). ‘Faktor Mensch’ in der Entwicklung von zuverlässigen Werkstoffen – eine Assistenz zur Unterstützung menschlicher Entscheidungen und Einflussgrößen. 63. Frühjahrskongress 2017 der GfA: Soziotechnische Gestaltung des digitalen Wandels, 17.02.2017, Zürich

  • Oevermann, T., Saalfeld, S., Niendorf, T. & Scholtes, B. (2017). Safe and reliable components by process integration of inductive heat treatment and deep rolling. 10th International Conference on Industrial Tools and Advanced Processing Technologies, 24. – 26.04.2017, Ljubljana

  • Zarges, J.-C., Feldmann, M., Judt, P.O., Ricoeur, A. & Heim, H.-P. (2017). Man-Made Cellulose Fiber Reinforced Polypropylene – Characterization of Fracture Toughness and Crack Path simulation. ANTEC 2017 – The plastics technology conference, 08.-10.05.2017, Anaheim

  • Bacaicoa, I., Luetje, M., Wicke, M., Geisert, A., Zeismann, F., Fehlbier, M. & Brueckner-Foit, A. (2016). Three-dimensional morphology of iron rich phases in recycled Al-Si-Cu cast alloys. 21st European Conference on Fracture, ECF21, 20.-24.06.2016, Catania, Italy

  • Brueckner-Foit, A., Bacaicoa, I., Luetje, M. & Wicke, M. (2016). Dreidimensionale Charakterisierung von Werkstofffehlern in einer Al-Guss-Legierung mittels hochauflösender Computertomographie. Werkstoffseminar Universität Saarbrücken, 06.12.2016, Saarbrücken

  • Freisinger-Schadow, S., Wahner, M. & Middendorf, B. (2016). Joining zone optimization of UHPFRC-bonded joints. Proceedings to 4th HiPerMat, 2016, Kassel, Germany, in print

  • Gundlach, J., Ricoeur, A. (2016). Numerical two-scale simulations with application towards refractories. In: Proceedings of ICTAM (Int. Conf. on Theor. and Appl. Mech.), 2016, Montreal

  • Gundlach, J., Henneberg, D., Scheel, J. & Ricoeur, A. (2016). Microscale-motivated continuum damage simulations of brittle ceramics under thermomechanical loading. J. Ceram. Sci. Tec., 2016, in print

  • Gundlach, J., Henneberg, D., Scheel, J. & Ricoeur, A. (2016). Schädigung, Risswachstum undTemperaturwechselfestigkeit keramischer Schichten bei Thermoschock: Mehrskalige Simulation. DVM-Tagung: Bruchmechanische Werkstoff- und Bauteilbewertung: Baubeanspruchungsanalyse, Prüfmethoden und Anwendungen, 16.-17.02.2016, Freiburg

  • Jennerich, M., Meyer, K., Arenius, M. & Sträter, O. (2016). Entwicklung und Evaluation eines mobilen, situationsadaptiven Assistenzsystems zur proaktiven Unterstützung von Personalhandlungen. 62. Frühjahrskongress 2016 der GfA: Arbeit in komplexen Systemen Digital, vernetzt, human?!, 04.03.2016, Essen

  • Judt, P.O. & Ricoeur, A. (2016). Loading analysis, crack growth simulations and experiments in structures with imperfect material interfaces. 12th World Congress on Computational Mechanics, 25.07.2016, Seoul, Korea

  • Judt, P.O., Ricoeur, A. & Linek, G. (2016). Crack paths in thin structures – Experiment and simulation. 17th International Conference on Experimental Mechanics, 06.07.2016, Rhodes, Greece

  • Judt, P.O. & Ricoeur, A. (2016). Numerical and experimental investigation of crack growth at imperfect material interfaces. 21th European Conference on Fracture, 23.06.2016, Catania, Italy

  • Judt, P.O. & Ricoeur, A. (2016). Crack path predictions in structures with material interfaces. 67. GAMM-Tagung, 08.03.2016, Braunschweig

  • Judt, P.O. & Ricoeur, A. (2016). Simulation von Risspfaden in ebenen Strukturen mit thermomechanischen Lasten und Materialgrenzflächen. 48th DVM-Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16.02.2016, Freiburg, Deutschland

  • Luetje, M., Bacaicoa, I., Wicke, M. & Brueckner-Foit, A. (2016). Characterization, Segmentation and Simulation of a casted Aluminum alloy using X-ray tomography. Zeiss XEN UM, 15.- 16.12.2016, Vienna, Austria

  • Scheel, J. & Ricoeur, A. (2016). Microcrack-based continuum damage model with application towards graded refractories. European Conference on Fracture – fracture and safety, 20.- 24.06.2016, Catania

  • Scholtes, B. (2016). Eigenspannungen – die Regel nicht die Ausnahme. Tagung Werkstoffprüfung 2016: Fortschritte in der Werkstoffprüfung für Forschung: Prüftechnik – Kennwertermittlung – Schadensvermeidung. 34. Vortrags- und Diskussionstagung mit begleitender Ausstellung. 01. – 02.12.2016, 1 – 12, Neu-Ulm

  • Sälzer, P., Feldmann, M. & Heim, H.-P. (2016). Effects of Particle Characteristics on the Mechanical Properties of Wood-Plastic Composites. International Conference of the Polymer Processing Society, PPS 32, 25.-29.07.2016, Lyon, Frankreich

  • Trütner, M., Freisinger-Schadow, S., Wetzel, A., Heim, H.-P. & Middendorf, B. (2016). Microstructural investigations of the interface of ultra-high performance concrete and mineral adhesive using high resolution-CT analysis. 2nd International Conference on the Chemistry of Construction Materials, 10 – 12 Oktober, 2016, München

  • Otten, S., Piotrowski, S. & Middendorf, B. (2016). Joining zone optimization of UHPFRC-bonded joints. Deterioration of Ultra High Performance Concrete (UHPC) under cyclic thermal stress in the temperature range of 200 to 500 °C. Proceedings to 4th HiPerMat, 2016, Kassel, Germany, in print

  • Wahner, M., Freisinger-Schadow, S., Wetzel, A. & Middendorf, B. (2016). Gluing of high performance concrete with mineral adhesive. Proceedings to 4th HiPerMat, 2016, Kassel, Germany, in print

  • Wang, Z. & Ricoeur, A. (2016). Simulation and numerical computation of crack growth in quasicrystals. 12th World Congress on Computational Mechanics, 25.07.2016, Seoul, Korea

  • Wang, Z. & Ricoeur, A. (2016). Simulation of quasicrystalline fracture behaviour with FEM. 21th European Conference on Fracture, 23.06.2016, Catania, Italy

  • Wang, Z. & Ricoeur, A. (2016). Analytical and numerical analysis of crack tip loading and path prediction in quasicrystals. 67. GAMM-Tagung, 09.03.2016, Braunschweig

  • Wicke, M., Luetje, M., Bacaicoa, I. & Brueckner-Foit, A. (2016). Characterization of Casting Pores in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis. Procedia Structural Integrity, Vol. 2, 2643-2649,Catania, Italy.

  • Wicke, M., Luetje, M., Bacaicoa, I., Geisert, A., Zeismann, F., Fehlbier, M. & Brueckner-Foit, A. (2016). Fracture mechanics assessment of casting defects in an aluminum alloy containing iron. 21st European Conference on Fracture, ECF21, 20.-24.06.2016, Catania, Italy

  • Wicke, M., Luetje, M., Bacaicoa, I. & Brueckner-Foit, A. (2016). On the propensity of ironinclusions towards crack initiation in a recycled Al-alloy. International Conference on Fatigue Damage of Structural Materials XI, 18.-23.09.2016, Hyannis, MA, USA

  • Feldmann, M., Heim, H.-P., Mamun, AA. & Zarges, J.-C. (2015). Prozess- und Materialoptimierung von Biokunststoffen- und -compositen. 7. Biopolymer-Kolloquium, 22. Januar 2015, Berlin

  • Feldmann, M. (2015). The Effect of Different Melt Temperatures during Injection Moulding on the Mechanical Properties of Biocomposites. 31st International Conference of the POLYMER PROCESSING SOCIETY, 7 – 11 June 2015, Jeju Island/Korea

  • Judt, P.O., Ricoeur, A. (2015). Global approaches for accurate loading analyses and crack path predictions at single and two-cracks systems, Proceedings in Applied Mathematics and Mechanics, GAMM Tagung, Lecce, Italy, in press

  • Judt, P.O., Ricoeur, A. (2015). Crack path predictions and experiments in plane structures with anisotropic properties and material interfaces, Proceedings of the 5th International Conference on CRACK PATHS (CP 2015), Ferrara, Italy, in press

  • Sälzer, P., Feldmann, M. & Heim, H.-P. (2015). Wood-Polypropylene-Composites: Influence of Particle Size and Shape on Mechanical Properties. Baltic Polymer Symposium, 16-18.09.2015, Riga

  • Zarges, J.-C., Heim, H.-P. & Feldmann, M. (2015). In-Line Rheological Characterisation of Natural Fibre Reinforced Composites During the Injection Moulding Process. PPS conference, 21.-25.09.2015, Graz/Austria