Antonia Mehrtens, Bachelor's thesis SoSe 2024
Experimental investigation of wood-wood nail joints taking into account different angles between force and fiber direction and compressive and tensile loading |
Andy Fischer, Master's project WiSe 2023-2024
Dynamic analysis of timber bridges with elastomer supports |
Ai-Phien Ho, Master's thesis WiSe 2023-2024
Load-bearing capacity of shear-stressed steel-timber connections (SHV ) with profiled nails and screws |
Philipp Berger, Bachelor project WiSe 2023-2024
Development and optimization of an evaluation scheme for aged nail connections of board/plank trusses |
Ai-Phien Ho, Master's project SoSe 2023
Connections with pin-shaped fasteners in timber construction - investigations into friction in the area of the perforated soffit |
Abdulkader Sabouni, Bachelor project SoSe2023
Adhesives for load-bearing timber construction - application, duration of usability and influencing parameters |
Nathalie Gräbe, Master's thesis WiSe 2022-2023
Numerical and experimental investigations into the load-bearing and deformation behavior of segmented ceiling elements made of multi-part composite timber cross-sections |
Felix Schulte, Bachelor's project WiSe 2022-2023
Residual load-bearing capacity of timber-concrete composite cross-sections in the event of failure of the composite effect |
Maximilian Unger, Bachelor project WiSe 2022-2023
Experimental investigations at nodal points of aged nail connections of board trusses |
Kelvin Zeddies, Bachelor thesis WiSe 2022-2023
Multi-storey timber buildings in mixed construction - investigations of load distribution taking into account validated stiffnesses |
Maximilian Wolz, Bachelor's project WiSe 2022-2023
Experimental investigations at nodal points of aged nail connections of board trusses |
Sarah Niemeyer, Bachelor thesis WiSe 2022-2023
Experimentalinvestigations into the influence of diameter and driving angle on shear-stressed connections with wooden dowels |
Sarah Niemeyer, Bachelor project WiSe 2022-2023
Experimental investigations on the influence ofdriving depth and driving angle on the pull-out and shear-off behavior of wooden dowels |
Annalena-Elisabeth Funke, Bachelor WiSe 2022-2023
Load-bearing capacity of nailed connections in timber construction in shear - comparison between DIN EN 1995-1-1:2010 and prEN 1995-1-1:2022 |
Mareike Schaake, Bachelor WiSe 2022-2023
Load-bearing capacity of nailed connections in timber constructionwith staples - comparison between DIN EN 1995-1-1:2010 and prEN 1995-1-1:2022 |
Daniel Kattenbach, Bachelor WiSe 2022-2023
Experimental investigations on bolted tension anchors under cyclic loading |
Daniel Kattenbach, Bachelor project SoSe 2022
Experimentalinvestigations on nodal points of aged nail connections of board trusses |
Johannes Küllmer, Master SoSe 2022
Load-bearing capacity of shear-stressed pin-shaped connections in timber construction |
Christian Wiens, Bachelor SoSe 2022
Design processing of the fundamental repair of the Mülmich underpass in Unter-Empfershausen |
Maurice Engels, Bachelor's project SoSe 2022
Addition of storeys in timber construction - verification of the applicability of the simplified response spectrum method |
Mareike Schaake, Bachelor project, SoSe 2022
Use of screws in anchoring wall elements in seismically active zones in Germany - state of the art |
Henriette Röse, Bachelor project, SoSe 2022
Application of solid wood components as wall elements in seismically active zones in Germany - state of the art |
Annalena-Elisabeth Funke, Bachelor project, SoSe 2022
Load-deformation behavior of multi-storey wall panels in timber construction considering non-linear spring elements |
Ann-Charlotte Spangenberg, Master SoSe 2022
Testing the use of fiber optic measurement technology for monitoring bonded wood-concrete composite structures |
Kevin Goldmann, Bachelor project, SoSe 2022
Numerical investigations into the load-bearing and deformation behavior of multi-part composite timber deck systems with compliant bonding |
Malte Rosdorff, Master, SoSe 2022
Investigationsinto the load-deformation behavior of wall panels made of glulam and laminated veneer lumber under cyclic action |
Laura Charline Neitzel, Master's project SoSe 2022
A parameter study on the ceiling-wall interaction of multi-segmented cross-laminated timber wall panels |
Lars Völlmecke, Bachelor WiSe 2021-2022
Experimental investigations at nodal points of aged nail joints of board trusses |
Hjalmar Koch, Master WiSe 2021-2022
Shear tests on nail connections - influence of the test setup on the load-bearing capacity |
Lars Völlmecke, Bachelor project WiSe 2021-2022
Determination of parameters of nailed joints of old board and plank trusses |
Enrico Volkmann, Bachelor WiSe 2021-2022
Bonded wood-concrete composite: comparative calculation to the results of full-scale component tests |
Malte Rosdorf, Master's project SoSe 2021
Investigations into the load-deformation behavior of shear anchors in wall panels made of glulam and laminated veneer lumber under monotonic and cyclic action |
Ai Phien Ho, Bachelor SoSe 2021
Structural analysis and evaluation of the structural safety of the Odenberg Tower |
Andy-Erwin Fischer, Bachelor SoSe 2021
Concept, design and calculation of a canopy for test material in front of the Technik III/2 building |
Luis Möller, Bachelor project SoSe 2021
Application and development of structural models for new teaching units in the field of building construction with the "Mola Structural Kit" |
Nikolay Shmakov, Bachelor SoSe 2021
Experimental determination of the mechanical properties of clay building panels subjected to disc-like loads |
Max Braun, Master WiSe 2020-2021
Optimization of the joint geometry of bonded wood-concrete composite parts with bonding by joint grouting |
Raphael Karges, Bachelor WiSe 2020-2021
Swelling and shrinkage behavior of Gmelina arborea |
Ann-Charlotte Spangenberg, Bachelor WiSe 2020-2021
Experimental determination of tensile forces in nails in shear-stressed joints using fiber optic sensors |
Manula Hennerkes, Master WiSe 2020-2021
Development of variants for the static-constructive securing of individual frames in roof structures of baroque churches |
Til Waschkowitz, Master WiSe 2020-2021
Experimental and analytical investigations into the load-bearing behavior of screws in sheet steel-wood connections under cyclic loading |
Jonas Gaida, Master, WiSe 2020-2021
Design of a test methodology for bonded wood-concrete composite test specimens for carrying out the glass house test |
Tarek Estanboly, Bachelor project WiSe 2020-2021
Determination of fracture mechanical material parameters of BauBuche - specific fracture energy in mode I |
Ronahi Khalil, Bachelor project WiSe 2020-2021
Determination of fracture mechanical material parameters of BauBuche - specific fractureenergy in mode II |
Matthias Schwind, Bachelor SoSe 2020
A parameter study of ceiling-wall interaction of multi-segmented cross-laminated timber constructions |
Laura Charline Neitzel, Bachelor SoSe 2020
Determination of the bulk density of wood and wood-based materials - comparison of different measurement methods with error identification |
Fabian Müller, Bachelor project SoSe 2020
A description of the ceiling-wall interaction of cross laminated timber constructions with non-linear spring elements |
Jan Geselle, Nico Roth, Bachelor project SoSe 2020
Experimental investigations into the perforation resistance of smooth-shafted nails in OSB boards |
Steffen Bankes, Andre Wetterich, Bachelor project SoSe 2020
Hole friction strength of Gmelina Aborea - A tropical species |
| Manuela Hennerkes, Master's project, summer semester 2020
Structural design, calculation and construction of a new storey in Vienna |
Philipp Schirner, Master's project, SoSe 2020
Investigations into the ductility of single-cut, bolted sheet steel-wood connections under cyclic loading |
Matthias Schwind, Bachelor's project, summer semester 2020
Structural design for a new storey in Vienna in collaboration with architecture students |
Enrico Volkmann, Bachelor's project, summer semester 2020
Determination of load propagation angles in wooden panes, taking into account the relevant influencing parameters using the finite element method |
