2023

Scharifi, E.: Grundlagen zur thermo-mechanisch induzierten Eigenschaftsgradierung von ausscheidungshärtbaren Aluminiumknetlegierungen. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 6. Kassel (D): Kassel University Press, 2023, ISBN 978-3-7376-1144-2

Scharifi, E.; Yardley, V. A.; Weidig, U.; Szegda, D.; Lin, J.; Steinhoff, K.: Hot Sheet Metal Forming Strategies for High-Strength Aluminum Alloys: A Review—Fundamentals and Applications. In: Advanced Engineering Materials (2023). DOI: 10.1002/adem.202300141

Scharifi, E.; Hirte, S.; Lotz, S.; Mlynek, M.; Weidig, U.; Ademaj, A.; Steinhoff, K.: Characterization of macroscopic local deformation behavior of thermo-mechanically graded high strength aluminum and steel alloys. In: Materials Research Proceedings 25 (2023) 245-252

Scharifi, E.; Mianroodi, J.R.; Roscher, M; Weidig, U.; Jägle, E.A.; Steinhoff, K.: Thermo-mechanical gradation of precipitation-hardenable aluminum alloy AA7075 by differential cooling. In: Materials Letters Volume 331, 15 January 2023. doi.org/10.1016/j.matlet.2022.133465

2022

Lotz, S.; Zhang, J.; Scharifi, E.; Morak, R.; Weidig, W.; Göken, J.; Broeckmann, C.; Steinhoff, K.: Microstructural Influences Caused by Different Aging Strategies on the Strain-Dependent Damping of the High-Strength Aluminum Alloy AA7075. In: Metals 12(12), 2172, 2022. doi.org/10.3390/met12122172

Scharifi, E.; Nietsch, J. A.; Quadfasel, A.; Weidig U. and Steinhoff, K.: "Effect of Thermo-Mechanically Activated Precipitation on the Hot Deformation Behavior of High Strength Aluminum Alloy AA7075" Metals 12 (2022), no. 10: 1609. doi.org/10.3390/met12101609

Decke, J.; Engelhardt, A.; Rauch, L.; Degener, S.; Sajadifar, S.V.; Scharifi, E.; Steinhoff, K.; Niendorf, T.; Sick, B.: Predicting Flow Stress Behavior of an AA7075 Alloy Using Machine Learning Methods. Crystals 2022, 12, 1281. doi.org/10.3390/cryst12091281

Lotz, S.; Scharifi, E.; Weidig, W.; Steinhoff, K.: Effect of Combined Forming and Aging Processes on the Mechanical Properties of the Precipitation-Hardenable High-Strength Aluminum Alloys AA6082 and AA7075. In: Metals 12 (8), S. 1250, 2022. DOI:10.3390/met12081250

Scharifi, E.; Nietsch, J. A.; Quadfasel, A.; Weidig, U.; Steinhoff, K.: Influence of Microstructural Conditions on Hot Deformation Behavior of Precipitation Hardenable Aluminum Alloy AA7075. In: Oldenburg, M.; Hardell, J.; Casellas, D. (Edtrs.): Proceedings of the 8th International Conference on Hot Sheet Metal forming of High-Performance Steel, Barcelona (Spain): 2022, pp. 711-718, ISBN: 978-3-95735-150-0

Lotz, S.; Zhang, J.; Scharifi, E.; Weidig, U.; Göken, J.; Broeckmann, C.; Steinhoff, K.: Influence of Aging Strategies on the Strain-Dependent Damping of the High-Strength Aluminum Alloy AA7075. In: Oldenburg, M.; Hardell, J.; Casellas, D. (Edtrs.): Proceedings of the 8th International Conference on Hot Sheet Metal forming of High-Performance Steel, Barcelona (Spain): 2022, pp. 263-270, ISBN: 978-3-95735-150-0

Lotz, S.; Scharifi, E.; Weidig, U.; Steinhoff, K.: Efficient Processing of Precipitation Hardenable High-Strength Aluminum Alloys by Combined Forming and Aging Processes. In: Oldenburg, M.; Hardell, J.; Casellas, D. (Edtrs.): Proceedings of the 8th International Conference on Hot Sheet Metal forming of High-Performance Steel, Barcelona (Spain): 2022, pp. 239-246, ISBN: 978-3-95735-150-0

Göken, J.; Saba, N.; Steinhoff, K.: Measurements of Acoustic Radiation of Tonewood Spruce at Different Clamping Loads. ACTA PHYSICA POLONICA A, No. 1, Vol. 141 (2022), pp. 54-63. doi.org/10.12693/APhysPolA.141.54

Sajadifar, S. V.; Scharifi, E.; Wegener, T.; Krochmal, M.; Lotz, S.; Steinhoff, K.; Niendorf, T.: On the low-cycle fatigue behavior of thermo-mechanically processed high-strength aluminum alloys. International Journal of Fatigue 156 (2022) 106676. doi.org/10.1016/j.ijfatigue.2021.106676

2021

Scharifi, E.; Roscher, M.; Lotz, S.; Weidig, U.; Steinhoff, K.; Jägle, E. A.: Functional Gradation in Precipitation Hardenable AA7075 Alloy by Differential Cooling Strategies. Key Engineering Materials (Volume 883), April 2021, pp. 159-166.  https://doi.org/10.4028/www.scientific.net/KEM.883.159

Scharifi, E.; Shoshmina, D.; Biegler, S.; Weidig, U.; Steinhoff, K.: Influence of Hot Deformation on the Precipitation Hardening of High-Strength Aluminum AA7075 during Thermo-Mechanical Processing. In: Metals, 2021. https://doi.org/10.3390/met11050681

Scharifi, E.; Schade, T.; Ademaj, A.; Sajadifar, S. V.; Weidig, U.; Niendorf, T.; Steinhoff, K.: Characterization of Mechanical Properties, Macroscopic Deformation Behavior and Microstructure of Functionally Graded 22MnB5 Steel. In: steel research international, 2021, 2000633. https://doi.org/10.1002/srin.202000633

Scharifi, E.; Savaci, U.; Kavaklioglu, Z. B.; Weidig, U.; Turan, S.; Steinhoff, K.: Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy. In: Materials Characterization, Volume 174, April 2021, 111026. https://doi.org/10.1016/j.matchar.2021.111026

2020

Heider, B.; Scharifi, E.; Engler, T.; Oechsner, M.; Steinhoff, K.: Influence of heated forming tools on corrosion behavior of high strength aluminum alloys. In: Materials Science and Engineering Technology - Open Access -  https://doi.org/10.1002/mawe.202000125

Sajadifar, S. V.; Scharifi, E.; Weidig, U.; Steinhoff, K.; Niendorf, T.: Performance of Thermo-Mechanically Processed AA7075 Alloy at Elevated Temperatures - From Microstructure to Mechanical Properties. In: Metals - Open Access Metallurgy Journal 2020 10 (7). pp. 884.  https://doi.org/10.3390/met10070884

Sajadifar, S. V.; Scharifi, E.; Weidig, U.; Steinhoff, K.; Niendorf, T.: Effect of Tool Temperature on Mechanical Properties and Microstructure of Thermo-Mechanically Processed AA6082 and AA7075 Aluminum Alloys. In: HTM Journal of Heat Treatment and Materials (2020), Vol. 75 (3), 2020, pp. 177-191.  https://doi.org/10.3139/105.110412 

Scharifi, E.; Sajadifar, S. V.; Moeini, G.; Weidig, U.; Böhm, S.; Niendorf, T; Steinhoff, K.: Dynamic Tensile Deformation of High Strength Aluminum Alloys Processed Following Novel Thermo‐Mechanical Treatment Strategies. In: Advanced Engineering Materials (2020). DOI: org/10.1002/adem.202000193

Völkers, S.; Scharifi, E.; Sajadifar, S. V.; Böhm, S.; Weidig, U.; Niendorf, T.: On the influence of in-situ sound wave superposition on the microstructure of laser welded 7000 aluminum alloys. In: Journal of Advanced Joining Processes (2020). DOI: org/10.1016/j.jajp.2020.100013

2019

Sajadifar, S. V.; Moeini, G.; Scharifi, E.; Lauhoff, C.; Böhm, S.; Niendorf, T.: On the Effect of Quenching on Postweld Heat Treatment of Friction-Stir-Welded Aluminum 7075 Alloy. In: Journal of Materials Engineering and Performance (2019). DOI: 10.1007/s11665-019-04252-3

Scharifi, E.; Danilenko, A.; Weidig, U.; Steinhoff, K.: Influence of plastic deformation gradients at room temperature on precipitation kinetics and mechanical properties of high strength aluminum alloys. In: International Journal of Engineering Research and Applications (IJERA), Vol. 09, No. 06, 2019, pp. 42-48

Scharifi, E.; Schade, T.; Ademaj, A.; Weidig, U.; Steinhoff, K.: Method for Characterizing Functional Graded Properties of 22MnB5. In: Oldenburg, M.; Hardell, J.; Casellas, D. (Edtrs.): Proceedings of the 7th International Conference on Hot Sheet Metal forming of High-Performance Steel, Lulea (Sweden): 2019, pp. 683-691, ISBN: 978-3-95735-104-3  

Scharifi, E.; Erbskorn, F.; Ademaj, A.; Kavaklioglu, Z. B.; Weidig, U.; Steinhoff, K.: Potentialities of Process Cycle Time Reductions at Hot Stamping of Aluminum Alloys. In: Oldenburg, M.; Hardell, J.; Casellas, D. (Edtrs.): Proceedings of the 7th International Conference on Hot Sheet Metal forming of High-Performance Steel, Lulea (Sweden): 2019, pp. 237-245, ISBN: 978-3-95735-104-3  

Scharifi, E.; Knoth, R.; Weidig, U.: Thermo-mechanical forming procedure of high strength aluminum sheet with improved mechanical properties and process efficiency. In: Procedia Manufacturing 29 (2019), pp. 481-489. doi:10.1016/J.PROMFG.2019.02.165

2017

Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 6th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Warrendale (USA): AIST, 2017, ISBN 978-1-935117-66-7

Scharifi, E.; Kuhnhenn, D.; Ademaj, A.; Weidig, U.: An Experimental Investigation of Hot Forming Effects on Mechanical Properties of High-Strength Aluminum Alloys AA6082 and AA7075. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 6th International Conference on Hot Sheet Metal forming of High-Performance Steel, Warrendale (USA): AIST, 2017, pp. 683-690, ISBN: 978-1-935117-66-7

Hilgenberg, K.; Rethmeier, M.; Steinhoff, K.: Surface structuring by pulsed laser implantation. In: Materials Science Forum 879 (2017), pp. 750-755

2016

Norman, D. P.; Hensen, G.; Pujante, J.; Schwinghammer, H.; Ademaj, A.; Weidig, U.: A New Criterion to Predict Micro-Crack Depth in Direct Press Hardening of Zinc Coated Boron Steel from Stress-Time History Simulation Results. In: Journal of Materials Processing Technology (Paper submitted)

2015

Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2015, ISBN 978-3-95735-023-7

Hilgenberg, K.; Steinhoff, K.: Texturing of skin-pass rolls by pulsed laser dispersing. In: Journal of Materials Processing Technology 225 (2015), pp. 84-92

2014

Clobes, J.: Adaptive Control Strategies for the Production of Thermo-Mechanically Tailored Products. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 4. Kassel (D): Kassel University Press, 2014, ISBN 978-3-86219-736-1 

Hilgenberg, K.; Behler, K.; Steinhoff, K.: Localized dispersing of ceramic particles in tool steel surfaces by pulsed laser radiation. In: Applied Surface Science 305 (2014), pp. 575-580

Hilgenberg, K.: Investigation of the Self-Organising Behaviour of Laser Implanted Tool Surfaces. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 5. Kassel (D): Kassel University Press, 2014, ISBN 978-3-86219-788-0 

2013

Stein, T.; Fuss, D.; Grahlmann, P.; Luetje, M.; Brueckner-Foit, A.; Steinhoff, K.; Weidig, U.: Simulation based microstructural optimization of thermo-mechanically treated steel components. In: Materials Science and Engineering Technology, Weinheim (D): Wiley-VCH, Vol. 44 - No. 12,  2013, pp. 977-984

Hilgenberg, K.; Steinhoff, K.: New Approach for Texturing of Skin-Pass Rolls by Localized Laser Dispersing. In: Proceedings of the 9th International Rolling Conference/ 6th European Rolling Conference, Venice (I), 2013, pp. 1-11 

Horwatitsch, D.; Merstallinger, A.; Steinhoff, K.: Vergleich von zwei Reibungsmethoden für die Simulation von Umformprozessen. In: Franek, F.; Pauschitz, A. (Edtr.): Automotive tribology - Beiträge der Tribologie für die moderne Fahrzeugtechni. Wien (A): Österreichische Tribologie Gesellschaft, 2013, pp. 97-104

Horwatitsch, D.: Entwicklung eines Reibmodells für hohe Temperaturen und hohe Umformgrade. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 3. Kassel (D): Kassel University Press, 2013, ISBN 978-3-86219-646-3 

Ademaj, A.; Weidig, U.; Steinhoff, K.: Phenomenological Thermo-Physical Approach on Process Monitoring in Hot Stamping of Coated Boron Steel. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 239-248

Ademaj, A.; Donis, A.; Weidig, U.; Steinhoff, K.: Hot Stamping of Multi-Material Composites. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 481-488

Tonne, J.; Clobes, J.; Ademaj, A.; Alsmann, M.; Mischka, M.; Morgenroth W.; Becker, H.-H.; Stursberg, O.: Model based optimization of furnace temperature profiles with regard to economic and ecologic aspects in hot stamping of 22MnB5. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 177-184

Bachmann, M; Fell, R; Ademaj, A.: Investigation on surface and process parameters influencing the friction behavior in hot sheet metal forming. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 507-516

Picas, P; Lara, A.; Casellas, D.; Ademaj, A.; Steinhoff, K.: Fatigue Performance Of Press Hardened Steels With Tailored Material Properties: A Compromise Between High Strength And Damage Tolerant Microstructures. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 251-258

Pujante, P.; Ramirez, R.; Ademaj, A.; Steinhoff, K.; Dessain, C; Vilaseca, M.; Casellas, D.: Measurement of Adhesive Wear on Hot Forming Tools. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 371-378

Perez-Santiago, R.; Billur, E.; Ademaj, A.; Sarmiento, C.; Berlanga, R.; Altan, T.: Hot Stamping a B-Pillar with Tailored Properties: Experiments and Preliminary Simulation Results. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013, pp. 83-90

Horwatitsch, D.; Merstallinger, A.; Steinhoff, K.: Applicability of Friction Testing Methods for Determination of Friction under Forming Conditions. In: Khan, A. S.; Kabirian, F.; Liu, J.; Serebreni, M. (edtrs.):  Proceedings of PLASTICITY '13: The Nineteen International Symposium on Plasticity and its Current Applications. Fulton (MD, USA): NEAT Press, 2013, pp.58-60

Weidig, U.; Fuß, D.; Clobes, J.: Investigation of Plastic Forming under the Influence of Locally and Temporally Variable Temperature and Stress States. In: Heim, H.-P.; Biermann, D.; Homberg, W. (Eds.): Functionally Graded Materials in Industrial Mass Production | Volume 2. Verlag Wissenschaftliche Scripten, Auerbach, 2013, pp. 35-53, ISBN 978-3-942267-91-5

Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2013 ISBN: 978-3-942267-82-3

2012

Göken, J.; Golovin, I. S.; Andrianova, T. S.; Steinhoff, K.; Brink, H.: Thermo-Mechanical Influence on the Internal Friction of a 51CrV4 Shaft. In: Chinese Physical Letters, Vol. 29, No. 11. Peking (CN): Chinese Physical Society, 2012

Hilgenberg, K.; Huskic, A; Mienert, G.; Steinhoff, K.: LASER-assisted net-shape forming of a miniature gear shaft with functionally graded properties. In: Heim, H.-P.; Biermann, D.; Maier, H. M. (Edtrs.): Proceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel (D): Verlag Wissenschaftliche Scripten, 2012, pp. 121-126

Fuß, D.; Clobes, J.; Weidig, U.; Steinhoff, K.: Evaluation of preheating strategies improving the mechanical properties in intermediate areas of functionally graded materials.  In: Heim, H.-P.; Biermann, D.; Maier, H. M. (Edtrs.): Proceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel (D): Verlag Wissenschaftliche Scripten, 2012, pp. 85-90

Clobes, J.; Fuß, D.; Alsmann, M.; Becker, H.-H.; Steinhoff, K.: Adaptive Fuzzy Logic Controller for the Production of Functionally Graded Materials with Tailored Microstructural Properties. In: In: Heim, H.-P.; Biermann, D.; Maier, H. M. (Edtrs.): Proceedings of the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel (D): Verlag Wissenschaftliche Scripten, 2012, pp. 79-84

Ademaj, A.; Donis, A.; Prokoph, S.; Weidig, U.; Steinhoff, K.: Hot stamping strategies for manufacturing of thermo-mechanically graded parts. In: Proceedings of the 4th International Conference on Thermomechanical Processing, Sheffield (UK), 2012

Clobes, J.; Riemer, J.; Rorot, A.; Fuß, D.; Alsmann, M.; Watermeier, H.-J.; Becker, H. H.; Steinhoff, K.: An Adaptive Control Architecture for Precision Control of Temporally and Spatially Varying Temperature Fields in Bulk-Metal Forming for the Production of Functionally Graded Materials.  In: Proceedings of the 4th International Conference on Thermomechanical Processing, Sheffield (UK), 2012

2011

Quint, K.J.; Hartmann, S.; Rothe, S.; Saba, N.; Steinhoff, K.: Experimental validation of high-order time integration for non-linear heat transfer problems. Computational Mechanics, Volume 48, Issue 1 (2011), pp. 81-96

Clobes, J.; Alsmann, M.; Watermaier, H.J.; Becker, H.H.; Steinhoff, K.: Rapid Control Prototyping for the Production of Functionally Graded Materials with Tailored Microstructural Properties utilizing COMSOL Multiphysics. Proceedings of the fifth European COMSOL Conference, 2011

Saba, N.; Fuß, D.; Weidig, U.; Steinhoff K.: Functional Gradation Produced by Differential Thermo-Mechanical Processing. In: Hirt, G.; Tekkaya, A.E. (Edtrs.): Steel Research International. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011, Düsseldorf (D): Verlag Stahleisen GmbH, 2011, pp. 944-949

Maikranz-Valentin, M.; Göken, J.; Steinhoff, K.: Damping Behaviour of Thermo-Mechanically Graded Materials. In: Hirt, G.; Tekkaya, A.E. (Edtrs.): Steel Research International. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011, Düsseldorf (D): Verlag Stahleisen GmbH, 2011, pp. 1190-1195

Weidig, U.; Barbakadze, N.; Wagner, S.; Steinhoff K.:Thermo-mechanical Microforming of Wire by Dieless Drawing Process. In: Hirt, G.; Tekkaya, A.E. (Edtrs.): Steel Research International. Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011, Düsseldorf (D): Verlag Stahleisen GmbH, 2011, pp. 308-313

Barbakadze, N.; Wagner, S.; Weidig, U.; Steinhoff K.: Multi-Laminated Composite Parts Designed by Thermo-Mechanical Forming. In: Hirt, G.; Tekkaya, A.E. (Edtrs.): Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, Düsseldorf (D): Verlag Stahleisen GmbH, 2011, pp. 663-668

Maikranz-Valentin, M.; Clobes, J.; Schulz, M.; Kulp, S.; Alsmann, M.; Steinhoff, K.: Local Characterization of Mechanical Properties of Hot Formed Parts. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, pp. 49-55

Clobes, J.; Fuß, D.; Alsmann, M.; Watermeier, H.-J.; Becker, H.-H.; Steinhoff, K.: Numerical Optimization of Temporally and Spatially Varying Temperature Distributions for the Production of Functionally Graded Materials with Tailored Microstructural Properties. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, pp. 211-219

Schupfer, M.; Steinhoff, K.: Market Development and Technological Perspectives in Press Hardening of UHSS. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, pp. 271-281

Barbakadze, N.; Wagner, S.; Weidig, U.; Ademaj, A.; Steinhoff, K.: Novel Approach of Thermo-Mechanical Forming Technology for Development of Multi-Laminated Composite Parts. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, pp. 407-414

Ademaj, A.; Kurz, T.; Rosner, M.; Manzenreiter, T.; Hartmann, D.; Sommer, Andreas; Kelsch, R.: Trends and Developments in the Usability and Production of Press-Hardenend Components with Cathodic Corrosion Protection. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, pp. 491-498

Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2011, ISBN 978-3-942267-17-5

Saba, N.: Untersuchung der plastischen Formgebung unter Einfluss örtlich und zeitlich veränderlicher Temperatur- und Spannungszustände. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 2. Kassel (D): Kassel University Press, 2011, ISBN 978-3-86219-108-6

2010

Wagner, T.; Broecker, C.; Saba, N.; Biermann, D.; Matzenmiller, A.; Steinhoff, K.: Modelling of a thermomechanically coupled forming process based on functional outputs from a finite element analysis and from experimental measurements. In: AStA Advances In Statistical Analysis (Sonderausgabe zur ENBIS EMSE), (2010), pp. 1-15

Maikranz-Valentin, M.; Saba, N.;Barbakadze, N.; Weidig, U.; Noster, U.; Steinhoff, K.: Tailored components for automotive applications produced by thermo-mechanical forming. In: Kawalla, R. (Edtr.): Proc. 17. Sächsische Fachtagung Umformtechnik SFU: Werkstoffe und Komponenten für den Fahrzeugbau, Freiberg (D): Institut für Metallformung, 2010

2009

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Golovin, I.S.; Ivleva, T.V.; Flejszar; A.; Riehemann, W.: Mechanical spectroscopy study of thermo-mechanically treated 51CrV4 steel. Materials Science and Engineering A, 521-522 (2009), pp. 335-339

Loges, F.: Entwicklung neuer Strategien zur Messung und Regelung der Bandplanheit beim Flachwalzen. In: Steinhoff, K. (Edtr.): Berichte zur Metallformgebung Band 1. Kassel (D): Kassel University Press, 2009, ISBN 978-3-89958-754-8 

Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2009, ISBN 978-3-937524-84-9

Steinhoff, K.; Maikranz-Valentin, M.; Saba, N.; Weidig, U.: Position and Time dependent Thermo-Mechanical Treatment of Sheet Steel for Light Weight Structures. In: Kawalla, R. (Edtr.): Meform 2009 - Herstellung und Weiterverarbeitung von Flachprodukten, Freiberg (D):  TU Bergakad., 2009, pp. 130-144

Steinhoff, K.; Saba, N.; Maikranz-Valentin, M.; Weidig, U.: Optimized Processes and Products in Hot Sheet Metal Forming. In: Oldenburg, M.; Steinhoff, K.; Prakash, B. (Edtrs.): Proceedings of the 2nd International Conference on Hot Sheet Metal forming of High-Performance Steel, Auerbach (D): Verlag Wissenschaftliche Scripten, 2009, pp. 29-42

Weidig, U.; Saba,N.; Steinhoff,K.: Functional gradation by differential thermo-mechanical treatment. International Journal of Microstructure and Materials Properties, Vol. 4  (2009) 5/6, pp. 649-663

2008

Bröcker, C.; Steinhoff, K.; Matzenmiller, A.: Process Simulation of Stub Shaft Forging with Local Heating and Cooling - An Analysis with EFG. Computer Methods in Materials Science, Vol. 8 (2008) , pp. 144-153

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I. S. : Change of Structure and Properties of 51CrV4 Shaft Caused by Thermo-Mechanical Treatment. In: Golovin, I.S.; Levin, D. M. (Edtrs.): Interaction between Defects and Anelastic Phenomena in Solids. Solid State Phenomena vol. 137 (2008), pp. 169-181

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I. S.: Functional gradation and its influence on damping behaviour of 51CrV4 steel.  Materials Characterization 59 (2008) 9, pp. 1178-1184

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I. S.: Internal Friction of 51CrV4 Shaft Influenced by Thermo-mechanical Coupling. Acta Metallurgica Sinica (English Letters) 21 (2008) 2, pp. 79-84

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I.S.: ормирование функционально ориентированной структуры вала из стали 50CrV4 методом ермомеханической обработки. Journal of Functional Materials 2 (2008) 1, pp. 34-38

Göken, J.; Maikranz-Valentin, M.; Timmerberg, J.; Luker, S.; Fuß, D.; Feierabend, J.; Steinhoff, K.: Microstructural investigations of functionally graded 51CrV4 steel using beamforming method. Metallurgical analysis 28 (2008) 2, pp. 1273-1280

Ivleva, T.V.; Göken, J.; Golovin, I.S.; Zuberova, Z.; Maikranz-Valentin, M.; Steinhoff, K.: Damping in AZ31 ECAP-Processed Alloy. In: Golovin, I.S.; Levin, D. M. (Edtrs.): Interaction between Defects and Anelastic Phenomena in Solids. Solid State Phenomena vol. 137 (2008), pp. 181-189

Maier, H.J.; Tschumak, S.; Weidig, U.; Steinhoff, K.: Functional Gradation of Low Alloy Steel by Differentially Controlled Phase Transformation. steel research int. 79 (2008) 2, pp. 105-110

Maikranz-Valentin, M.; Weidig, U.; Schoof, U.; Becker, H.-H.; Steinhoff, K.: Components with Optimised Properties due to Advanced Thermo-mechanical Process Strategies in Hot Sheet Metal Forming. steel research int. 79 (2008) 2, pp. 92-97

Weidig, U.; Hübner, K.; Steinhoff, K.: Bulk Steel Products with Functionally Graded Properties Produced by Differential Thermo-mechanical Processing. steel research int. 79 (2008) 1, pp. 59-65

Hardell, J.; Prakash, B.; Steinhoff, K.: High Temperature Tribological Studies on Surface Engineered Tool Steel and High Strength Boron Steel. In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6 - Bad Harzburg (D): Grips Media GmbH, 2008, pp. 69-76

Maikranz-Valentin, M.; Saba, N.; Weidig, U.; Göken, J.; Steinhoff K.: Investigation on Functionally Graded 51CrV4 and its Damping Behavior. In: Yang, D. Y.; Kim, Y. H.; Park, C. H. (Edtrs.): Advanced Technology of Plasticity 2008. The Korean Society for Technology of Plasticity, 2008, Gyeongju (Korea), pp. 2283-2288

Maikranz-Valentin, M.; Saba, N.; Weidig, U.; Weißner, R.; Steinhoff, K.: Hot Forming of Work Hardened Steel. In: Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6 - Bad Harzburg (D): Grips Media GmbH, 2008, pp. 191-197

Steinhoff, K.: Neues zur Strukturierung von Feinblechoberflächen. In: Steinhoff, K.; Kopp, R. (Edtrs.): Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. Bad Harzburg (D): Grips Media GmbH, 2008, pp. 239-260

Steinhoff, K.; Oldenburg, M.; Prakash, B. (Edtrs.): Proceedings of the 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, GRIPS' Sparkling World of Steel Vol. 1: Proceedings, No. 6 - Bad Harzburg (D): Grips Media GmbH, 2008, ISBN 978-3-937057-18-7

Steinhoff, K.; Weidig, U.; Borowikow, A.; Becker, H.-H.: Tailored X - Maßgeschneiderte Produkte brauchen maßgeschneiderte Fertigungsprozesse. In: Steinhoff, K.; Kopp, R. (Edtrs.): Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. Bad Harzburg (D): Grips Media GmbH, 2008, pp. 217-231

Weidig, U.; Steinhoff, K.: Neue Perspektiven und Anwendungen für das freie Längen. In: Steinhoff, K.; Kopp, R. (Edtrs.): Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. Bad Harzburg (D): Grips Media GmbH, 2008, pp. 145-163

2007

González-Martínez, R.; Göken, J.; Letzig, D.; Steinhoff, K.; Kainer, K.U.: Influence of Aging on Damping of the Magnesium-Aluminium-Zinc-Series. Journal of Alloys Compounds 437 (2007), pp. 127-132

González-Martínez, R.; Göken, J.; Letzig, D.; Timmerberg, J.; Steinhoff, K.; Kainer, K.U.: Influence of Heat Treatment of Damping Behaviour of the Magnesium Wrought Alloy AZ61. Acta Metall. Sin. (Engl. Lett.) 20, No. 4, (2007), pp. 235-240

Weidig, U.; Saba, N.; Steinhoff, K.: Massivumformprodukte mit funktional gradierten Eigenschaften durch eine differenzielle thermo-mechanische Prozessführung. wt-online 10-2007, pp. 745-752

Elsner, A.M.; Ponge, D.; Raabe, D.; Steinhoff, K.; van der Zwaag, S.: Warmwalzstrategien für IF und TRIP Stähle. In: Hirt, G. (Edtr.): 22. Aachener Stahlkolloquium Umformtechnik, Stahl und NE-Werkstoffe - Der Zukunft Form Geben. Aachen (D): Verlagshaus Mainz GmbH 2007, pp. 257-266

Göken, J.; Maikranz-Valentin, M.; Steinhoff, K.; Pavlova, T.S.; Ivleva, T.V.; Golovin, I.S.: Change of Structure and Properties of 51CrV4 Shaft Caused by Thermo-Mechanical Coupling. XIth International Conference "Imperfection, Interaction and Anelastic Phenomena in Solids" (IIAPS-XI), Tula (Ru), 24 - 28 September 2007

Göken, J.; Stulíková, I.; Smola, B.; Steinhoff, K.; Hort, N.; Očenášek, V.: Rolling of AM50 Magnesium Cast Alloy. In: Kainer, K. U. (Edtr.): Magnesium Alloys and their Applications. Weinheim: Wiley-VCH Verlag GmbH und Co. KGaA 2007, pp. 620-626

Maikranz-Valentin, M.; Bergmann, K.; Weidig, U; Steinhoff, K.: Components with Optimized Properties due to Modification of Thermo-Mechanical Process Design for Press Hardening. In: Vollertsen F.; Yuan, S. (Edtrs.): Proc. of the 2nd ICNFT: 2nd International Conference on New Forming Technology. Bremen, BIAS-Verlag 2007, pp. 337-350

Weidig, U.; Saba, N.; Steinhoff, K.: Functional gradation by differential thermo-mechanical treatment. In: Kuzman, K. (Edtr.): Proc. of the 6th ICIT & MPT 2007, September 11-14, 2007, Bled (SI). Celje (SI): TECOS Slovenian Tool and Die Development Centre 2007, pp. 141-144

Steinhoff, K., Stahlinstitut VDEh (Edtr.): Moderne Thermomechanische Prozessstrategien in der Stahlumformung. Verlag Stahleisen mbH, Düsseldorf (D), 2007