Current research projects

The content on this page was translated automatically.

Current research projects

  • DB Neurofeedback – Eye-tracking-based resilience training to improve the human reliability of train dispatchers (2026–2027, DB InfraGO)
  • VesPEr: Co-trust as a sociotechnical factor in the practice of radioactive waste disposal. (2026–2030; BGE in collaboration with Leibniz University Hannover – Institute for Radioecology and Radiation Protection, Clausthal University of Technology – Chair of Geomechanics and Multiphysical Systems, risicare CH, Risk Dialogue Foundation CH)
  • KOMPASS – Assessment of the debriefing culture at the Children’s Center of Kassel University Hospital (2025–2028, Gesundheit Nordhessen)
  • Employee Survey on Psychological Risk Assessment (2025–2026; Alstom)
  • Quincy – Collaborative Project: Sociotechnical Innovations for Sustainable Skills Development in European Collaboration Networks (2025–2028, Institute for Ecological Economic Research (IÖW) GmbH, August Wilhelm Scheer Institute for Digital Products and Processes (AWSi) gGmbH, Meiser Solar GmbH)
  • PharmaXR – The Pharma-XR research project is developing a digital training environment using extended realities and AI-based activity recognition to enable employee training in safety-critical production processes, such as vaccine manufacturing, even before final implementation. This results in significant time and quality benefits. (2024–2027; FLAVIA IT-Management GmbH, PTS Training Service, Sigmund Lindner GmbH, University of Kassel, Economic Cooperative of German Veterinarians eG)
  • JUST – Just and Sustainable Transformation (2023–2026; Hans Böckler Foundation)
  • Exoskeletons that mimic human movement patterns (2021–2026; SIKA with A&O)
  • Establishment of a critical evaluation system for site selection (2017–2026; BGE)

Spin-off project

  • CoARtec - Collaborative Aug mentedReality CoARtec - Collaborative Augmented Reality - is a start-up project of the University of Kassel, funded by an EXIST start-up grant. The team develops augmented reality assistance systems for industrial assembly tasks that integrate information provision as well as error detection and feedback, revolutionizing quality assurance and the training of skilled workers. (2024-2026; funding through EXIST start-up grant)
  • DB Safety – Methodology Development for Organizational Learning Using Incident Analyses Focusing on Human and Organizational Factors (2023–2026; DB Netz AG)
  • ShiftUp – Analysis of work schedule design and change management for work schedule models (2023–2026; B. Braun)
  • SDG Graduate Program in Sustainability Research – Social, Economic, and Cultural Institutions of a Just Transition (2022–2026; University of Kassel)
  • TRANSENS – Transdisciplinary research on the disposal of high-level radioactive waste in Germany – Research to improve the quality and robustness of the sociotechnical design of the disposal pathway (2019–2025; BMWi in collaboration with Öko-Institut e.V., Freie Universität Berlin (FUB), risicare GmbH, Leibniz University Hannover (LUH), Technical University of Berlin (TUB-WIP), Karlsruhe Institute of Technology (KIT), ETH Zurich, Department of Environmental Systems Science (USYS), Technical University of Braunschweig (TUBS), Clausthal University of Technology (TUC), Christian-Albrechts-University of Kiel (CAU))
  • ENSURE – Uncertainties and Regulatory Aspects Regarding Final Repository Safety (2021–2025; BGE)
  • TRegKS – Kassel Region Transformation Network (2023–2026; Kassel Region Economic Development Agency GmbH, DGB Bildungswerk Hessen e.V., HESSENMETALL North Hesse Employers’ Association, Association for Social Policy, Education, and Vocational Promotion e.V., University of Kassel, UniKasselTransfer), https://tregks.de/
  • WIKUS – Recording and Analysis of Ergonomic Postures and Movements at Selected Workstations (2024, WIKUS-Sägenfabrik Wilhelm H. Kullmann GmbH & Co. KG)
  • Employee Survey on the Risk Assessment of Mental Stress (2022–2024, sera GmbH)
  • ErgoBest – Survey of Ergonomic Best Practices in Industrial Work Processes Using the Internet of Things and Mixed Reality (2021–2024; Federal Ministry of Education and Research in collaboration with mfcit, MONDATA, and the German Research Center for Artificial Intelligence (DFKI))
  • Lene Health MABO – Electronic Measurement and Intelligent Assessment of Psychological Stress in Workplaces (2023–2024; Lene Health with A&O)
  • Simulation Technologies in Education and Training: Effectiveness of Training and Haptic Training Environments in the Education and Training of Train Dispatchers (2021–2023; DB Netz AG)
  • Ergonomic Analysis of the University of Kassel’s Cafeteria Operations (2023; Studierendenwerk Kassel)
  • Probst – Study of the physical strain associated with laying machines (2022–2023)
  • VW – Evaluation of exoskeletons in the paint shop (2022; VW)
  • STEM STUDIES in a Practical Partnership (2021–2022; ESF)
  • Employee Survey on Organizational Climate and Stress (2019–2022; Elisabeth-Krankenhaus GmbH Kassel)
  • Stihl – Study of physical strain and product characteristics of various hedge trimmers (2022)
  • SiKoR—Safe and Cost-Effective Decommissioning Planning and Implementation of Reliable Personnel Operations (2017–2021; BMBF in collaboration with the Karlsruhe Institute of Technology (KIT))
  • Effectiveness of Simulation Technologies in the Training and Continuing Education of Train Dispatchers (2018–2021; DB Netz)
  • Pocket-sized physical therapy. Therapeutic AI-based training for the office and at-home rehabilitation. “Together, It’s AI” (Civic Innovation Platform). 2020 Project Winner, Federal Ministry of Labor and Social Affairs
  • Learning from Exceptional Incidents (2019–2020; Stromnetz Hamburg GmbH)
  • Safety Culture Assessment (2019–2020; ENI Versalis with TU Dublin)
  • Smart Glasses in Workplace Practice—Assessment of Work-Related Strain and Evaluation of Physical Stress (2019–2020; Hans Böckler Foundation)
  • Employee Survey on Organizational Climate (2018–2020; University of Kassel)
  • Employee Survey on Mental Health Risk Assessment (2018–2020; Bombardier)
  • Validation of the Tripl3Leader Questionnaire for Managers (2018–2020; T3L)
  • IntAKom Collaborative Project—Intelligent Enhancement of Manual and Semi-Automated Work Through the Use of Digital Communication Technologies; Subproject: Work and Task Design 4.0 for Good Digital Work (2017–2020; BMBF in collaboration with the Technical University of Darmstadt (TUD), Ffw GmbH, Trilux GmbH & Co. KG, Mikrolab GmbH, DATRON AG, and Bright Solutions GmbH).
  • Analysis of Behavior-Related Accidents in Occupational Safety (2012–2020; RWE)
  • Safer Materials—Modeling and Simulation of Human Reliability for Safe and Reliable Materials(2015–2018; Hessian Ministry of Science and Art, LOEWE Research Cluster)—Poster A1 & Poster B4
  • Consulting & Strategy Development on the Topic of “Autonomous Driving” (2018; Continental).
  • Conducting work analyses on subway lines regarding mental and physical stress (2013–2017; German Social Accident Insurance for the Wood and Metal Industries; in collaboration with the University of Darmstadt – IAD and the DGUV)
  • Behavioral prediction using big data from analyses of behavior-related accidents in occupational safety (2016–2017; RWE)
  • Prediction of the availability of train dispatchers based on operational data (2015–2017; Deutsche Bahn)
  • Support for safety assessments in rail operations through incident analysis and evaluation of human reliability (2014–2017; Deutsche Bahn)
  • Safe and error-minimizing design of manual assembly processes (2014–2017; University of Kassel, Department 15, in collaboration with the Quality and Process Management Research Group)
  • PREFLOW—Ergonomic evaluation of work processes and intelligent feedback to the operator (2015–2017; Federal Ministry of Education and Research in collaboration with ITfM GmbH, ITP GmbH, and the German Research Center for Artificial Intelligence (DFKI))
  • Risk assessment of the Frankfurt–Buenos Aires–Frankfurt cockpit flight rotation for individual flights as well as for the rotation as a whole (2012–2013; Deutsche Lufthansa AG)
  • Analysis of incidents in air traffic control with regard to human reliability (DFS, 2013–2014)
  • Study of safety culture in a large organization in the energy sector (2013–2014; Vattenfall)
  • Assessment of the usability of automation systems in mechanical engineering (2014; LENZE, VDE)
  • Analysis and revision of the idea management system at B. Braun Melsungen (2014; B. Braun Melsungen)
  • Effective Team Composition of Students in Courses at the University of Kassel – Development of a Competency Self-Assessment Tool (2014; University of Kassel, Central Teaching Support, Dean’s Office of Faculty 15)
  • Measures to Increase Safety and Health Awareness at the University of Kassel (2014; University of Kassel, Occupational Safety)
  • Assessment of Human Reliability for a Safe Energy Transition (2012–2014; BMWi)
  • Students with Development Potential (2009–2014; ESF & IHK Kassel in collaboration with the University of Kassel IBB)
  • Emotion-Related Interferences and Task-Related Team Behavior: Affective Arousal, Experience, and Cognitive Demands of Tasks on the Ship’s Bridge (2008–2014; University of Kassel, Research Group A&O, in collaboration with Oldenburg University of Applied Sciences)
  • Evaluation of Changes to the EUROWINGS Service Concept for the Purpose of Conducting a Risk Assessment (2014; EUROWINGS)
  • Usability Study DIALOG+ (2012–2014; B. Braun Avitum, Melsungen)
  • Work analysis for the Technical City Hall (2012–2013; City of Kassel)
  • Organizational Climate Survey at the University of Kassel (2012–2013; University of Kassel)
  • Accessible e-learning (2012–2013; University of Kassel)
  • Modeling Human-System Safety (SMSmod) – Safe and Robust System Design through Modeling of Ergonomic Conditions for High Human Reliability (2010–2013; DFG in collaboration with the DLR and the IfEV at TU Braunschweig)
  • AAL@Home: Ambient Assisted Living at Home (2010–2013; BMBF in collaboration with Leuphana University of Lüneburg, Kieback & Peter, Panasonic, Ilmenau University of Technology, Adendorf Family Practice, Lilienthal Home Care Service, and the Paritätischer Wohlfahrtsverband Lüneburg)
  • Conducting work analyses based on the Chaku-chaku principle with the goal of identifying suitable methods and procedures for evaluating such work systems (2012; Wood and Metal Workers’ Compensation Association)
  • Investigation of fitness criteria for train dispatchers with regard to modern information technologies and demographic change (2011–2012; Deutsche Bahn)
  • Conducting workload analyses in operational logistics for the distribution of original parts with the goal of improving ergonomic working conditions (2011–2012; Volkswagen Original Parts Center Depot Kassel)
  • Workload analysis in maintenance (2011–2012; Deutsche Bahn)
  • Holistic work system design and improvement of the work environment and leadership to reduce absenteeism (2011–2012; Bosch Göttingen)
  • Analysis of mental and physical stress among cabin crew following the redesign of the interior of a long-haul aircraft (2011–2012; Deutsche Lufthansa)
  • Conducting stress analyses in operational logistics within the Original Parts sales division with the goal of improving ergonomic working conditions (2011–2012; Volkswagen Original Parts Center Depot Kassel)
  • Human Reliability Analysis: Different Methods, Their Application, and Comparison (2011; ERASMUS cooperation between the University of Prague and the University of Kassel)
  • Ergonomics for Nicaragua (2010–2012; DAAD)
  • Dealing with Difficult Process Participants and Healthy Leadership (2010–2011; State Social Courts of North Rhine-Westphalia, Hesse, and Bremen)
  • Measures to Reduce the Shortage of Engineering Professionals in SMEs (2009–2012; ESF)
  • Age-Differentiated Work System Design in the Automotive Industry ( 2005–2011; DFG)
  • Consideration of Human Factors in System Design in the Railway Industry—“HUMAN FACTORS” (2008–2011; Deutsche Bahn)
  • Safety Culture—Adaptation and Further Development of a Questionnaire to Assess Safety Culture in a Large Organization in the Energy Sector (2010–2011; Vattenfall)
  • Investigation of the operator cabs of lignite excavators in open-pit mines with regard to informational and physical stress (2011; RWE)
  • Improving the quality of course evaluations (2010–2011; University of Kassel)
  • Study of demographic change in the North Hesse region (2010–2011; Regional Management North Hesse)
  • "Human Error" in an educational ship bridge simulator (2009–2010; University of Kassel, A&O Research Group, in collaboration with Oldenburg University of Applied Sciences)
  • Evaluation of the ATQP Approach for Pilot Assessment and Training (2009–2010; TUIfly)
  • Safety Scanning Method & Tool Development (2009–2010; EUROCONTROL in collaboration with NLR and HELIOS)
  • Investigation of occupational safety aspects and development of improvement measures in the energy sector (2009; EON Mitte)
  • Work Design and Process Ergonomics in Engine Remanufacturing (2009; Volkswagen)
  • Space Utilization Concept for the City of Kassel Mailroom (2009; City of Kassel)
  • Analysis of incidents in air traffic control with regard to human reliability (GACA – General Authority of Civil Aviation, Saudi Arabia, 2008–2010)
  • Coordination of the DFG Priority Program “Age-Differentiated Work Systems” (2005–2008; DFG)
  • Development of a Concept for Continuous Process Improvement (2008; FRÄGER)
  • Job Satisfaction During the SAP Implementation at the University of Kassel (2008–2009; University of Kassel)
  • CypermanS (2005-2008 EU Commission, Daimler)
  • Participation and Innovation (2005-2008 HBS)
  • ASBESTOS - Asbestos in the Baltic States (2005-2007 EU - Leonaro)
  • Doctoral program "Design competence for advanced computer science applications" (2004-2006 Uni-Kassel
  • ENTLEARN (2004-2007 EU joint project with Finland)
  • ENTREVA Evaluation of education in the start-up context - Entrepreneurship (2002-2004 EU joint project with Finland)
  • Cooperation with the universities in Managua in occupational health and safety (2002-2005 University of Kassel)
  • Analysis and design of models of humane work in e-business - e@rbeit (2002-2004 BMFT)
  • Postman: Ergonomic study of foot delivery of letter post (2002-2003 Deutsche Post)
  • Acting Locally for Employment - A.L.E (2001 EU joint project with Italy)
  • STEP Stocks and Trends in European Professions (2001-2003 EU joint project with Italy)
  • Adaptation of older employees to occupational changes: Development and evaluation of a computer training method (2000-2003 BfA)
  • Designing group work to meet occupational health and safety requirements (2000 BAuA)
  • Identification and assessment of successful changes in work design and company organization (2000-2001 BMFT/FhG ISI)
  • Ergonomic design of the software IRONMAN of Deutsche Telekom AG (2000-2001 Deutsche Telekom)
  • Survey and analysis of virtual qualification offers in company training and further education (1999-2001 University of Kassel)
  • Teleworking - New concepts for the home office (1997-1998 University of Kassel)
  • Evaluation, intervention and transfer of the Leonardo project: Virtual companies in initial vocational training (ISIS) - OSIRIS (1997-2000 EU Commission)
  • Integrated technology research "Adapted technology for older people Part I + II" (1995-1996 Ministry of Science, Hesse)
  • Work design and qualification - sub-project within the project "Occupational health and safety in high-speed machining" (1995-1999 BMFT)
  • Flexibilization of quality management systems according to DIN ISO 9000ff in connection with simultaneous task processing in the entire product development process in SMEs (1994-1996 Forschungskuratorium Maschinenbau)
  • CAD reference model phase II: - Sub-project: Implementation of human-oriented forms of organization with a work-oriented technology approach in production (1994-1997 BMFT)
  • Exhibition "Information and communication technologies in production" Development of a concept and implementation (1991 BAU)
  • CeA II: Experience knowledge in the CIM environment - CNC machining turning, milling (as part of the project network: Experience knowledge in the CIM environment) (1990-1994 BMFT)
  • CeA I: Process control through experiential knowledge and its technical support (1990-194 BMFT)
  • Preparation of HDA design knowledge for the consulting services of the CIM technology transfer offices (1989-1991 GhK)
  • Creation of a guideline for the humane and economical use of CNC systems in small and medium-sized enterprises (1988-1993 BMFT)
  • Requirements and approaches for human-oriented work design in computer-aided design and planning processes (1985-1988 BMFT)
  • Learning facilitation index (2001-2006; automotive supplier and packaging industry)
  • Competence development (2005-2006; automotive supplier and packaging industry)
  • Company competence development to secure the location (2002-2005; BMBF; ESF)
  • Human-building technology interface (2002-2005)
  • Learning culture 2000plus - analysis and evaluation of workplaces in terms of their learning facilitation (1999-2001; ABWF)
  • Competence and organizational development in administration (1998 to 2000; BMBF and BMA together with the City of Kassel, IGBCE and bfw)
  • Qualification needs analysis (1998-1999; BMW AG)
  • Quality criteria of the modified version of the Activity Analysis Inventory (TAI) with special consideration of computer-aided application (1997-1999; DFG)
  • Development of methods for error classification in the field of occupational health and safety and the resulting design guidelines for the development of computerized management tools (1996-2000; BMBF)
  • Flexible companies and their contribution to the development of employee skills (1996-1999; ABWF)
  • Implementation of labor science findings in the carpentry trade (1996-1997; BMFT)
  • Programme for the promotion of company personnel and organizational development in the new federal states (1995-1998; BMBF/BMA)
  • Effectiveness study on safety training for car drivers (1995-1998; BASt)
  • The Link between the Length of Road Drivers Working Time and Road Safety (1995-1997; EU)
  • Staffing time regulations for CAD workplaces (1994-1995; BAU)
  • Project Postgraduate Study Program Human Resources Development at the TU Chemnitz (1993-1996; BMBW)
  • Customer orientation in the CAx sector as a critical success factor (1993-1995; BMW)
  • Future European Automotive Working Structures for the Challenges of Technological, Social and Competitive Change Future Working Structures (1992-1996; EU together with Mercedes Benz, Rover, Peugeot, Renault, BMW, WZB, Cardiff University and Warwick)
  • Identification of fatigue and fatigue-like conditions based on work performance data (1992-1993; Daimler Benz)
  • Road freight transport sector project: 24-hour traffic and its effects on employee stress - exploratory study (1992-1993; BMFT)
  • Application-oriented design of typical software packages for CAD-AVA combinations in the construction industry in terms of optimal software ergonomics (1990-1993; BMFT)
  • Development of basic CAD models for the optimization of the process chain from development to production (1990-1993; BMFT)
  • Working on the screen in production - planning and realization of an exhibition unit as part of the German Occupational Health and Safety Exhibition (1990-1993; BAU)
  • Redesign of work and organizational structures with new technologies in office furniture production to reduce stress - main phase (1989-1991; BMFT)
  • Driver workplaces in the year 2000 (1987-1989; BMFT)
  • Further development of the activity analysis inventory - TAI (1986-1989; BMFT)
  • Redesign of work and organizational structures with new technologies in office furniture production to reduce stress - preliminary phase (1986-1987; BMFT)
  • Creation of a collection of examples of reliable ergonomic findings in the use of new technologies - CAD workstations (1986-1987; BAU)
  • Development of humane work structures in forging operations through the development and implementation of ergonomic framework conditions and the use of flexible production technology (1986; BMFT)
  • Determination of stress and strain in computer-aided design - investigations among designers in the field of research and development (1985-1989; BMFT)
  • Evaluation of the introduction of an integrated computer-aided communication and information system in the project: Humanization of work in the model: manufacturing service company (1985-1986; BMFT)
  • Job-related demands and stresses on professional drivers and their effects on risk tolerance and road safety (1985-1988; BASt and BMW)