Orientation phase
The content on this page was translated automatically.
The one-year orientation phase is divided into two areas: STEM Orientation and STEM Support Program.
In the STEM Orient ation area, you will attend at least one mathematics course, one or more STEM practice projects, specialized courses from the various majors, and key competency courses. You must complete coursework and/or exams in each of these courses for module completion. The total amount of work to be completed from this area is 30 credits for the entire orientation year.
In the STEM Support Program area, you will attend a plusMINT ring lecture, various mentoring opportunities, the plusMINT seminar, prerequisite and bridge courses, and you can try out any subject courses without any obligation. No exams are taken and no credits are earned in the MINT support program. Active participation in these courses is recorded via course credits or course transcripts and is recorded in the form of semester hours per week (SWS). The total number of courses to be taken in this area is 20 SWS for the entire orientation year .
More details about the individual courses can be found below.
In both areas, there are compulsory courses that you must attend and elective courses from which you can choose the ones that suit you best:
Depending on the math course you choose, your first two semesters could then look like this (click to enlarge):
These study plans are a non-binding suggestion for the distribution of courses over the two semesters of the orientation year. You put together your own individual timetables and they may well differ from the study plans shown.
Event offer:
SWS stands for semester hours per week, WiSe for winter semester, SoSe for summer semester.
Mandatory courses STEM orientation
These events must be taken.
The following information applies subject to the committee decision of the new plusMINT examination regulations.
Only one of the following courses must be taken. If the mathematics entrance test is not passed, the "Advanced course in mathematics" must be taken. Otherwise, "Mathematics I" or "Introduction to Analysis I" or "Fundamentals of Mathematics" +" Elementary Linear Algebra" can also be taken.
Advanced course in mathematics
The aim of the advanced course with 6 credits (2 SWS lecture incl. exercise in WiSe + 2 SWS lecture incl. exercise in SoSe) is to bring the mathematical knowledge and skills of the students up to the upper level mathematical level, which may not have been reached before. In addition, the treatment of specific further fundamental content from the mathematical courses of the majors ensures barrier-free entry into the mathematical modules of the majors. The advanced course in mathematics is based on the mathematical contents of Hessian high schools at the advanced course level and further basic contents of the mathematical subject courses: Number ranges, fraction terms, power laws, elementary functions, differential and integral calculus, and basic concepts of linear algebra. No prerequisites.
Mathematics I
This module with 9 credits (4 SWS lecture + 2 SWS exercise in WiSe) corresponds to the basic mathematics course in the first semester of engineering courses. Course contents are mainly vector calculus in the plane and in space, sequences and series of real numbers, real functions of a variable and differential and integral calculus of a variable. Passing the mathematics entrance test is a mandatory prerequisite for taking the exam.
Introduction to Analysis I
This module with 10 credits (4 SWS lecture + 2 SWS exercise in WiSe) corresponds to the basic calculus course in the first semester of the study programs Mathematics, Technomathematics and Physics. Content is a deeper introduction to basic structures and methods of calculus: metric spaces, convergence, continuity, structure of the real number system, basic properties of complex numbers, sequences, series in R and in C, differential calculus and integral calculus with one variable. A mandatory prerequisite for taking the exam is passing the mathematics entrance test.
Fundamentals of Mathematics + Elementary Linear Algebra.
These two modules, each with 5 credits (2 SWS lecture + 1 SWS exercise in WiSe), correspond to the basic mathematics courses in the first semester of Mathematics and Technomathematics. Teaching contents of "Fundamentals of Mathematics" are introduction to mathematical formula language, elementary set theory and logic, mathematical problem solving and mathematical proof. The course content of "Elementary Linear Algebra" includes solving systems of linear equations, real vector spaces and linear mappings, calculating with vectors and matrices, calculating determinants, eigenvalues and eigenvectors. Passing the mathematics entrance test is a mandatory prerequisite for taking the exam.
STEM projects are offered at all participating departments, one of which must be chosen as a required project. If desired, additional STEM projects can be taken as elective projects. The STEM projects introduce students to project work and are completed with a course credit. They include practical components which, depending on the project task, can consist, for example, of the student's own experiments, modeling or design tasks. Through your own practical work in teams, you will gain insights into the methods, objects of investigation and application perspectives of the respective subject and get to know its specific subject culture.
The topics of the STEM projects offered vary. Examples of regularly offered STEM projects are:
- MINT Project Nanostructure Science"Nanostructures in Everyday Life":
experiments on sunscreen, coated surfaces, natural dyes, and more in the chemistry lab. - MINT Project Physics"Spectroscopy and Greenhouse Gases":
Experiments with lasers, light, colors, and absorption of greenhouse gases, among others, on research equipment. - STEM Project Civil Engineering"Tensegrity - Design, Mathematics, Mechanics and Application of Tensegrity Structures":
theory and experiments on interesting structures made of rods and cables. - STEM Project Mathematics/Technomathematics"Mathematical Modeling":
Introduction to mathematical modeling and simulation as a basis for all STEM subjects using illustrative examples.
You can find out which MINT projects are offered in the respective semester via a Moodle course.
You can take courses from the university-wide catalog for additive key competencies: For example, various language courses, methods workshops, and seminars on the environment and sustainability.
Additive key competencies amounting to 3 credits are mandatory and will be credited.
Compulsory courses MINT accompanying program
These events must be taken.
The lecture series provides a detailed presentation of the available majors. Lecturers explain the respective study structure and provide insights into interesting research areas. This internal university overview of the main areas of study is supplemented by presentations from external guests from various companies in the STEM sector. They provide practical information about possible career fields and give insights into their activities and working methods. Following the lectures, you can engage in conversation with all the speakers in an informal atmosphere. Attending the lecture series will provide you with an interdisciplinary overview of the orientation and job perspectives of all offered majors and will support you in making a well-founded choice of major after the orientation phase.
The lecture series comprises 3 SWS per semester. Course credits are earned through course minutes.
The topics on the individual dates of the lecture series are published in a corresponding Moodle course.
A main component of the orientation phase is the diverse and intensive personal counseling and support of students to promote successful studies. This is primarily realized through a three-stage mentoring offer as well as a weekly seminar in which interdisciplinary skills for the further course of studies are learned.
The mentoring is composed of three levels of support: Student buddies from previous cohorts introduce students to everyday university life in their first semester and provide tips for a successful start to their studies; professors provide support in a group and an individual meeting to help students choose their focus; plusMINT project staff provide advice and offer at least 2x2 SWS seminar in the winter and summer semesters.
In addition to advising opportunities, especially for the orientation phase, workshops and lectures are offered in the plusMINT seminar, which are primarily intended to strengthen advanced study skills in interdisciplinary aspects: Study choice decisions, study and examination organization, IT skills, opportunities for student engagement, and gender and diversity.
Participation in 1 SWS mentoring per semester must be proven. Course credits are earned through attendance and written reflection assignments.
The topics of the individual plusMINT seminar dates are published in a corresponding Moodle course.
STEM Orientation Electives
You are free to choose from the following specialized courses during the orientation period, and you must take 14-18 credits depending on the mathematics course you choose.
Mechanics I
This compulsory module for civil and environmental engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise + 2 SWS tutorial) and is offered in the winter semester. The 6C module is completed with a written exam (60 min.). In this course, the basic methodology of mechanics is taught, taking into account the aspects of model building and analysis. The students are enabled, for example, to form mechanical models of simple technical systems, to calculate centers of gravity of bodies or to determine the equilibrium of structures. Recommended prerequisite is participation in the module Mathematics I.
Materials of Civil Engineering I
This compulsory module for civil and environmental engineering consists of the course of the same name (2 SWS lecture + 2 SWS tutorial) and is offered across semesters starting in the winter semester. The 6C module is completed with a written exam (90 min.) in the summer semester. Mechanical and physical fundamentals for the evaluation of materials and their behavior in use are taught, as well as the fundamentals of standards, production and behavior of e.g. cement, gypsum, lime, concrete, mortar and building ceramics, etc. No prerequisites.
Structural Engineering I / Representation Engineering.
This compulsory module for civil engineering consists of the courses "Baukonstruktion I" (2 SWS lecture + 2 SWS tutorial as well as "Darstellungstechnik / CAD" (2 SWS lecture + 2 SWS tutorial + compact course/practical course) and both take place in the winter semester. The 5C module is completed with a written exam (45 min.) in Building Construction I. Knowledge of the functionality of buildings and construction elements, the typology of buildings as well as the basics of construction drawing, the application of practice-oriented programs and the graphical representation of three-dimensional bodies are conveyed. No prerequisites.
Structural Design II / Building Physics
This compulsory module for civil engineering combines the courses "Baukonstruktion II" (2 SWS lecture + 2 SWS tutorial) and "Bauphysik" (2 SWS lecture), both take place in the summer semester. The 5C module is completed with two written examinations (45 & 60 min.). Knowledge of loads and load flow, masonry construction as well as building physics fundamentals, e.g. effects of cold, heat, moisture and noise are taught. Recommended prerequisite is completion of the module Building Construction I / Representation Technology.
Surveying
This compulsory module for civil and environmental engineering consists of the course "Surveying" (4 SWS lecture + exercises in small groups) and takes place in the summer semester. The 6C module is completed with a written exam (120 min.). The course contents are the basic procedures for the realization of the spatial reference (georeferencing) and the spatial data acquisition. This includes, for example, units of measurement, measurement accuracies, coordinate systems, instrumentation, and the production of site and elevation plans. No prerequisites.
Fundamentals of Construction Management and Construction Operations I
This compulsory (civil engineering) or elective (environmental engineering) module consists of the course "Fundamentals of Construction Economics and Construction Operations I" (4 SWS lecture + office hours) and takes place in the summer semester. The 6C module is completed with a written exam (120 min.). Here, students learn the basics from construction project planning to acceptance. This includes the understanding of (construction) companies in the economic and legal system, basics of the law on contracts for work and services as well as cost accounting systems and calculation of construction services and fees. No prerequisites.
Traffic Basics
This compulsory module for civil and environmental engineering consists of the courses Fundamentals of Traffic Planning (2 SWS lecture + tutorial) and Fundamentals of Traffic Engineering (2 SWS + repeat tutorial/speaker session), both taking place in the summer semester. The 6C module is completed with a combined exam (120 min.). Knowledge and methods of the essential planning steps are taught, e.g. for surveying and forecasting traffic demand or for network design. In addition, students should understand traffic engineering systems and be able to perform relevant calculations. No prerequisites.
Mathematics 2
Mandatory module in the 2nd semester of the Bachelor of Civil and Environmental Engineering, elective module in the Bachelor of Nanostructural Sciences with 9 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course contents are mainly systems of linear equations, matrices, differential and integral calculus of several variables and differential equations. Recommended prerequisite is the attendance of "Mathematics I".
The module descriptions are excerpts from the Module Handbook of the Bachelor of Civil Engineering program. This and further information can be found on the program homepage.
Digital Logic
Mandatory module in the 1st semester of the Bachelor of Electrical Engineering with 4 credits (2 SWS lecture + 1 SWS exercise in WiSe), mandatory module in the 1st semester of the Bachelor of Computer Science. Course contents are number representation and codes, Boolean algebra, design and simplification of switching networks, analysis and synthesis of switching networks, control unit design and microprogram control. No prerequisites.
Fundamentals of Electrical Engineering 1
Compulsory module in the 1st semester of the Bachelor of Electrical Engineering and Mechatronics with 11 credits consisting of the courses "Fundamentals of Electrical Engineering 1" (4 SWS lecture + 2 SWS exercise in WiSe) and "Electrotechnical Practical 1" (2 SWS laboratory practical in WiSe). Course contents include the calculation of currents and voltages in electrical networks, electrostatic fields and steady-state electric flow fields. Recommended prerequisites are mastery of elementary calculus and vector algebra.
Introduction to Programming
Mandatory module in the 1st semester of the Bachelor of Electrical Engineering and Mechatronics (2 SWS lecture + 1 SWS exercise in WiSe). Fundamentals of imperative programming are taught. No prerequisites.
Fundamentals of Electrical Engineering 2
Compulsory module in the 2nd semester of the Bachelor of Electrical Engineering and Mechatronics with 9 credits (4 SWS lecture + 2 SWS exercise in summer semester). Course contents are stationary and time-varying magnetic fields, alternating current theory and conductors. Recommended prerequisites are mastery of elementary calculus, vector algebra and complex calculus. Recommended prerequisites are the Fundamentals of Electrical Engineering 1 module and an understanding of infinite series and complex calculus.
Object-oriented programming + programming project
Mandatory module in the 2nd semester of the Bachelor Mechatronics and Electrical Engineering with 6 credits (2 SWS lecture + 2 SWS practical course in SoSe). Teaching content is object-oriented programming.
Computer Architecture
This compulsory module for computer science and electrical engineering consists of the course of the same name (2 SWS lecture + 2 SWS practical course) and takes place in the summer semester. This 6C module is completed with a written exam (90-120 min.). Course contents are the basics of information representation in computer systems as well as coding, automata and evaluation criteria of computer architectures. Students learn about the structure of different architectures and their characteristics. Recommended prerequisites are the modules "Technical Foundations of Computer Science", "Introduction to Computer Science" and "Fundamentals of Mathematics" or programming knowledge and the module "Digital Logic".
The module descriptions are excerpts from the module manual of the Bachelor Electrical Engineering program. This and further information can be found on the program homepage.
Introduction to Computer Science
This compulsory module for the Bachelor of Computer Science, Mathematics and Technomathematics consists of the course of the same name (4 SWS lecture + 2 SWS tutorial) and takes place in the winter semester. This 9C module is completed with a written exam (90-120 min.). Students acquire skills in the development of imperative procedural programs as well as object-oriented programming in Java and elementary knowledge of another programming language. In addition, they will learn basic concepts of computer science related to programming. No prerequisites.
Technical Foundations of Computer Science
This compulsory module in the 1st semester of Computer Science consists of the submodules/courses "Electrical Engineering for Computer Scientists" (2 SWS lecture + 1 SWS exercise + 2 SWS tutorial in WiSe) and "Digital Logic" (2 SWS lecture + 1 SWS exercise in WiSe). Contents of "Electrical Engineering for Computer Scientists" are basic physical and technical relationships in the field of electrical engineering as well as applications of methods for the calculation of direct current networks. Course contents of "Digital Logic" are number representation and codes, Boolean algebra, design and simplification of switching networks, analysis and synthesis of switching networks, control unit design and microprogram control. Recommended prerequisites for "Electrical Engineering for Computer Scientists" are a good knowledge of high school mathematics (basic concepts of differential and integral calculus and algebra).
Algorithms and Data Structures
This compulsory module for the Bachelor of Computer Science and Technomathematics or compulsory elective module for the Bachelor of Electrical Engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise) and takes place in the summer semester. The 6C module is completed with a written exam (75-120 min.). Elementary knowledge of algorithms and data structures of computer science as well as skills in comprehending and developing algorithms are taught. Recommended prerequisite is the module "Introduction to Computer Science" or "Introduction to Programming".
Computer Architecture
This mandatory module for computer science and electrical engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise) and takes place in the summer semester. This 6C module is completed with a written exam (90-120 min.). Course contents are the basics of information representation in computer systems as well as coding, automata and evaluation criteria of computer architectures. Students learn about the structure of different architectures and their characteristics. Recommended prerequisites are the modules "Technical Foundations of Computer Science", "Introduction to Computer Science" and "Fundamentals of Mathematics" or programming knowledge and the module "Digital Logic".
Laboratory C/Embedded Systems
This compulsory module for computer science consists of the course "Laboratory C" (2 SWS lecture) and a practical course "Laboratory Embedded Systems" (2 SWS practical course) and takes place in the summer semester. The 6C module is completed with a written exam (Lab C) and a practical report (Lab Embedded Systems). Students acquire the ability to create hardware-related programs in the C programming language and apply this practically. Recommended prerequisites are the modules "Introduction to Computer Science" and "Technical Foundations of Computer Science". In addition, passing the exam on "Laboratory C" is mandatory for participation in the practical part "Laboratory Embedded Systems".
Learning and Organization
This compulsory module for computer science consists of the course of the same name (1 SWS lecture) and takes place in the winter semester. The 2C module is completed with a written paper related to the content of another computer science course. This module is designed to help students succeed in their studies by teaching self-management techniques such as planning, time management, and specific exam preparation, as well as reflection skills and resilient coping with failure. No prerequisites.
The module descriptions are excerpts from the module handbook of the Bachelor of Computer Science program. This and further information can be found on the program homepage.
CAD - Computer Aided Design
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering and Mechatronics with 6 credits (2 SWS lecture + 4 SWS exercise in WiSe). Contents are the basics of technical drawing (e.g. standard fonts, dimensioning, representation of standard parts, sections, computer-aided CAD design). No prerequisites.
Sustainability, resource utilization and product life cycles.
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering and Mechatronics with 4 credits (2 SWS lecture + 2 SWS exercise in WiSe). Course contents include environmental accounting, resource cycles and technology assessment. No prerequisites.
Introduction to Mechanical Engineering
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering and Mechatronics with 3 credits (2 SWS lecture series + 2 SWS seminar in WiSe). The lecture series introduces working and research topics in mechanical engineering and mechatronics, the seminar is about self-organization & time management. No prerequisites.
Computer Science: Fundamentals of Programming
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering with 6 credits (2 SWS lecture + 3 SWS exercise in WiSe). Contents include principles, methods, concepts and notations of programming (simple data structures, object orientation,...). Recommended prerequisites are knowledge of computer applications.
Materials Engineering
Compulsory module in the 1st and 2nd semester of the Bachelor Mechanical Engineering with 8 credits consisting of the courses "Materials Engineering 1" (2 SWS lecture + 1 SWS exercise in WiSe), "Materials Engineering 2" (2 SWS lecture + 1 SWS exercise in SoSe) and the "Practical Course Materials Engineering" (2 SWS as block). Course contents are mainly the structural composition of construction materials (especially different iron and aluminum materials) and the behavior under mechanical stress. No prerequisites.
Electrical engineering and electronics in mechanical engineering
Mandatory module in the 3rd semester of the Bachelor of Mechanical Engineering with 6 credits (4 SWS lecture + 2 SWS exercise in WiSe). Course contents include DC networks, measurement methods, AC theory, semiconductor components (diodes, transistors), basic transistor circuits. Recommended prerequisites are basic knowledge of calculus and vector algebra.
Design Engineering 1
Mandatory module in the 2nd semester of the Bachelor of Mechanical Engineering and in the 4th semester of the Bachelor of Mechatronics with 6 credits (2 SWS lecture + 4 SWS exercise in SoSe). Course contents include design of screws, springs and rivets, design of welding, soldering, bonding, 3D design techniques. Recommended prerequisites are the modules "CAD" and "Mathematics 1".
Manufacturing Engineering 1
Mandatory module in the 2nd semester of the Bachelor of Mechanical Engineering with 3 credits (2 SWS lecture in SoSe). Course contents include basics of cutting manufacturing processes (drilling, turning, milling, grinding, water jet cutting, laser cutting,...). No prerequisites.
Engineering Mechanics 1
Compulsory module in the 2nd semester of the Bachelor Mechanical Engineering, compulsory elective module in the 2nd semester of the Bachelor Mechatronics with 6 credits (3 SWS lecture + 3 SWS exercise in SoSe). Contents are statics (e.g. force systems, center of gravity, internal forces) and the kinetics of the center of mass (e.g. momentum and energy theorem, vibrations). Recommended prerequisites are knowledge of mathematics at the high school level.
Chemistry for Engineers
Elective module of the Bachelor Mechanical Engineering with 2 credits (2 SWS lecture in WiSe). Course content is basic knowledge of chemistry (including structure of matter, chemical reactions, electrochemistry, and organic chemistry). No prerequisites.
The module descriptions are excerpts from the module handbook of the Bachelor Mechanical Engineering program. This and further information can be found on the program homepage.
Fundamentals of Mathematics
This module with 5 credits (2 SWS lecture + 1 SWS exercise in WiSe) corresponds to the compulsory course in the 1st semester of the Bachelor Mathematics and Technomathematics. Course contents are the introduction to mathematical formula language, elementary set theory and logic, mathematical problem solving and mathematical proof. A mandatory prerequisite for exam participation is passing the mathematics entrance test.
Elementary Linear Algebra
This module with 5 credits (2 SWS lecture + 1 SWS exercise in WiSe) corresponds to the mandatory course in the 1st semester of the Bachelor Mathematics, Technomathematics and Physics. Course contents are solving systems of linear equations, real vector spaces and linear mappings, calculating with vectors and matrices, calculating determinants, eigenvalues and eigenvectors. Passing the mathematics entrance test is a mandatory prerequisite for taking the exam.
Introduction to Analysis I
This module with 10 credits (4 SWS lecture + 2 SWS exercise in WiSe) corresponds to the basic calculus course in the first semester of the mathematics, technomathematics and physics programs. Content is a deeper introduction to basic structures and methods of calculus: metric spaces, convergence, continuity, structure of the real number system, basic properties of complex numbers, sequences, series in R and in C, differential calculus and integral calculus with one variable. A mandatory prerequisite for taking the exam is passing the mathematics entrance test.
Introduction to Analysis II
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of analysis with several variables (including curve integrals, extrema with constraints, gradient fields). Recommended prerequisite is the attendance of "Analysis I" and "Elementary Linear Algebra".
Linear Algebra and Analytic Geometry
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of linear algebra and analytic geometry (including abstract vector spaces and linear mappings, matrix normal forms, Euclidean vector spaces, affine spaces, scalar product). No prerequisites.
Introduction to Computer Science.
This compulsory module for the Bachelor of Computer Science, Mathematics and Technomathematics consists of the course of the same name (4 SWS lecture + 2 SWS tutorial) and takes place in the winter semester. This 9C module is completed with a written exam (90-120 min.). Students acquire skills in the development of imperative procedural programs as well as object-oriented programming in Java and elementary knowledge of another programming language. In addition, they will learn basic concepts of computer science related to programming. No prerequisites.
Further info can be found on the study program homepage.
CAD - Computer Aided Design
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering and Mechatronics with 6 credits (2 SWS lecture + 4 SWS exercise in WiSe). Contents are the basics of technical drawing (e.g. standard fonts, dimensioning, representation of standard parts, sections, computer-aided CAD design). No prerequisites.
Fundamentals of Electrical Engineering 1
Compulsory module in the 1st semester of the Bachelor Mechatronics and Electrical Engineering with 11 credits consisting of the courses "Fundamentals of Electrical Engineering 1" (4 SWS lecture + 2 SWS exercise in WiSe) and "Electrotechnical Practical 1" (2 SWS laboratory practical in WiSe). Course contents include the calculation of currents and voltages in electrical networks, electrostatic fields and steady-state electric flow fields. Recommended prerequisites are mastery of elementary calculus and vector algebra.
Sustainability, resource utilization, and product life cycles.
Compulsory module in the 1st semester of the Bachelor Mechanical Engineering and Mechatronics with 4 credits (2 SWS lecture + 2 SWS exercise in WiSe). Course contents include environmental accounting, resource cycles and technology assessment. No prerequisites.
Introduction to Mechatronics
Mandatory module in the 1st semester of the Bachelor of Mechanical Engineering and Mechatronics with 3 credits (2 SWS lecture series + 2 SWS seminar in WiSe). The lecture series introduces work and research topics in mechanical engineering and mechatronics, the seminar is about self-organization & time management. No prerequisites.
Introduction to Programming
Mandatory module in the 1st semester of the Bachelor of Electrical Engineering and Mechatronics (2 SWS lecture + 1 SWS exercise in WiSe). Fundamentals of imperative programming are taught. No prerequisites.
Design Engineering 1
Mandatory module in the 2nd semester of the Bachelor of Mechanical Engineering and in the 4th semester of the Bachelor of Mechatronics with 6 credits (2 SWS lecture + 4 SWS exercise in SoSe). Course contents include design of screws, springs and rivets, design of welding, soldering, bonding, 3D design techniques. Recommended prerequisites are the modules "CAD" and "Mathematics 1".
Fundamentals of Electrical Engineering 2
Mandatory module in the 2nd semester of the Bachelor of Electrical Engineering and Mechatronics with 9 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course contents are stationary and time-varying magnetic fields, alternating current theory and conductors. Recommended prerequisites are mastery of elementary calculus, vector algebra and complex calculus. Recommended prerequisites are the Fundamentals of Electrical Engineering 1 module and an understanding of infinite series and complex calculus.
Object-oriented programming + programming project
Mandatory module in the 2nd semester of the Bachelor Mechatronics and Electrical Engineering with 6 credits (2 SWS lecture + 2 SWS practical course in SoSe). Teaching content is object-oriented programming.
Materials of Mechanical Engineering
Mandatory module in the 1st semester of the Bachelor Mechatronics with 3 credits (2 SWS lecture in SoSe). Course contents are the structural and physical properties of metallic materials, ceramics and plastics. No prerequisites.
Engineering Mechanics 1
Compulsory module in the 2nd semester of the Bachelor Mechanical Engineering, compulsory elective module in the 2nd semester of the Bachelor Mechatronics with 6 credits (3 SWS lecture + 3 SWS exercise in SoSe). Contents are statics (e.g. force systems, center of gravity, internal forces) and the kinetics of the center of mass (e.g. momentum and energy theorem, vibrations). Recommended prerequisites are knowledge of mathematics at the high school level.
The module descriptions are excerpts from the module manual of the Bachelor Mechatronics program. This and further information can be found on the program homepage.
Introduction to Nanostructural Sciences
Compulsory module in the 1st year of the Bachelor Nanostructural Sciences with 9 credits consisting of the lecture series "Introduction to Nanostructural Sciences" (2 SWS in WiSe) and "Fundamentals of Biology for Nanostructural Sciences" (2 SWS in WiSe) as well as the lecture seminar "Introduction to Nanostructural Sciences" (2 SWS in SoSe) and the laboratory practical course "Basic Physical-Biophysical Practical Course" (3 SWS in SoSe). Course contents include fundamentals of nanostructures, application fields of nanotechnology and basic measurement experiments. No prerequisites.
Mechanics and Heat / Experimental Physics I
Mandatory module in the 1st semester of the Bachelor Physics with 7 credits and of the Bachelor Nanostructural Sciences with 9 credits (5 SWS lecture + 2 SWS exercise in WiSe). Course content includes detailed treatment of Newtonian mechanics (including motions, force fields, vibrations) and thermodynamics (including kinetic theory of gases, main theorems of thermodynamics, heat transport). No prerequisites.
General Chemistry
Mandatory module in the 1st semester of the Bachelor Nanostructural Sciences with 7 credits consisting of a lecture (3 SWS in WiSe), an exercise (1 SWS in WiSe), a seminar (1 SWS in WiSe) and a practical course (2 SWS in WiSe). Course content includes chemical bonding, kinetics and chemical equilibrium, acids and bases, oxidation and reduction. No prerequisites.
Mathematical Methods in Physics (I)
Compulsory module in the 1st semester of the Bachelor Physics with 6 credits and the Bachelor Nanostructural Sciences with 8 credits (4 SWS lecture + 2 SWS exercise in WiSe). Course content is important mathematical tools for application in the natural sciences such as vector algebra, Taylor expansion, partial derivatives and multiple integrals, simple differential equations, scalar and vector fields. No prerequisites.
► detailed module description.
Literature review
Elective module in the Bachelor Nanostructural Sciences with 2 credits (2 SWS lecture incl. exercise in WiSe). Course contents include scientific citation methods, IT-supported preparation of bibliographies, overview of relevant journals and literature databases in nanostructure sciences, physics, biology and chemistry. No prerequisites.
Electricity and Optics / Experimental Physics II.
Mandatory module in the 2nd semester Bachelor Physics with 7 credits and of the Bachelor Nanostructural Sciences with 9 credits (5 SWS lecture + 2 SWS exercise in SoSe). Course content includes detailed treatment of electrostatics (including charge, electric potential), electrodynamics (including electric current, magnetic fields, induction, Maxwell's equations, electromagnetic waves) and optics (including electromagnetic waves in matter, refraction, interference, diffraction, optical instruments). Recommended prerequisite is a good high school knowledge of mathematics.
Mathematical Methods in Physics II
Mandatory module in the 2nd semester of the Bachelor Nanostructural Sciences with 5 credits (2 SWS lecture + 1 SWS exercise in SoSe). Teaching content is important mathematical tools for application in the natural sciences such as integral theorems of Gauss and Stokes, curved coordinate systems, Fourier series and integrals, Fourier and Laplace transforms, probability distribution, statistics, error calculation, functions of complex variables. Mandatory prerequisite is the module "Mathematical Methods of Physics I".
The module descriptions are excerpts from the module manual of the Bachelor Nanostructural Sciences program. This and further information can be found on the program homepage.
Experimental Physics I / Mechanics and Heat
Compulsory module in the 1st semester of the Bachelor Physics with 7 credits and of the Bachelor Nanostructural Sciences with 9 credits (5 SWS lecture + 2 SWS exercise in WiSe). Course content includes detailed treatment of Newtonian mechanics (including motions, force fields, vibrations) and heat theory (including kinetic theory of gases, main theorems of thermodynamics, heat transport). No prerequisites.
Mathematical Methods in Physics (I)
Compulsory module in the 1st semester of the Bachelor Physics with 6 credits and the Bachelor Nanostructural Sciences with 8 credits (4 SWS lecture + 2 SWS exercise in WiSe). Course content is important mathematical tools for application in the natural sciences such as vector algebra, Taylor expansion, partial derivatives and multiple integrals, simple differential equations, scalar and vector fields. No prerequisites.
General Chemistry
Mandatory module in the 3rd semester of the Bachelor of Physics with 7 credits consisting of a lecture (3 SWS in WiSe), an exercise (1 SWS in WiSe) and a laboratory practical (3 SWS in WiSe). Course contents include chemical bonding, kinetics and chemical equilibrium, acids and bases, oxidation and reduction. No prerequisites.
Experimental Physics II / Electricity and Optics
Mandatory module in the 2nd semester of the Bachelor Physics with 7 credits and the Bachelor Nanostructural Sciences with 9 credits (5 SWS lecture + 2 SWS exercise in SoSe). Course content includes detailed treatment of electrostatics (including charge, electric potential), electrodynamics (including electric current, magnetic fields, induction, Maxwell's equations, electromagnetic waves) and optics (including electromagnetic waves in matter, refraction, interference, diffraction, optical instruments). Recommended prerequisites are the modules Mathematical Methods in Physics, Experimental Physics I, and Analysis I.
Introduction to Analysis II
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of analysis with several variables (including curve integrals, extrema with constraints, gradient fields). Recommended prerequisite is the attendance of "Analysis I" and "Elementary Linear Algebra".
Linear Algebra and Analytic Geometry
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of linear algebra and analytic geometry (including abstract vector spaces and linear mappings, matrix normal forms, Euclidean vector spaces, affine spaces, scalar product). No prerequisites.
► detailed module description.
The module descriptions are excerpts from the module handbook of the Bachelor Physics program. This and further info can be found on the program homepage.
Fundamentals of Mathematics
This module with 5 credits (2 SWS lecture + 1 SWS exercise in WiSe) corresponds to the compulsory course in the 1st semester of the Bachelor Mathematics and Technomathematics. Course contents are the introduction to mathematical formula language, elementary set theory and logic, mathematical problem solving and mathematical proof. A mandatory prerequisite for exam participation is passing the mathematics entrance test.
Elementary Linear Algebra
This module with 5 credits (2 SWS lecture + 1 SWS exercise in WiSe) corresponds to the mandatory course in the 1st semester of the Bachelor Mathematics, Technomathematics and Physics. Course contents are solving systems of linear equations, real vector spaces and linear mappings, calculating with vectors and matrices, calculating determinants, eigenvalues and eigenvectors. Passing the mathematics entrance test is a mandatory prerequisite for taking the exam.
Introduction to Analysis I
This module with 10 credits (4 SWS lecture + 2 SWS exercise in WiSe) corresponds to the basic calculus course in the first semester of the mathematics, technomathematics and physics programs. Content is a deeper introduction to basic structures and methods of calculus: metric spaces, convergence, continuity, structure of the real number system, basic properties of complex numbers, sequences, series in R and in C, differential calculus and integral calculus with one variable. A mandatory prerequisite for taking the exam is passing the mathematics entrance test.
Introduction to Computer Science
This compulsory module for the Bachelor of Computer Science, Mathematics and Technomathematics consists of the course of the same name (4 SWS lecture + 2 SWS exercise) and takes place in the winter semester. This 9C module is completed with a written exam (90-120 min.). Students acquire skills in the development of imperative procedural programs as well as object-oriented programming in Java and elementary knowledge of another programming language. In addition, they will learn basic concepts of computer science related to programming. No prerequisites.
Introduction to Analysis II
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of analysis with several variables (including curve integrals, extrema with constraints, gradient fields). Recommended prerequisite is the attendance of "Analysis I" and "Elementary Linear Algebra".
Linear Algebra and Analytic Geometry
Compulsory course in the 2nd semester of the Bachelor Mathematics, Technomathematics and Physics with 10 credits (4 SWS lecture + 2 SWS exercise in SoSe). Course content is the mathematically detailed treatment of linear algebra and analytic geometry (including abstract vector spaces and linear mappings, matrix normal forms, Euclidean vector spaces, affine
spaces, scalar product). No prerequisites.
Algorithms and Data Structures
This compulsory module for the Bachelor of Computer Science and Technomathematics or compulsory elective module for the Bachelor of Electrical Engineering consists of the course of the same name (2 SWS lecture + 2 SWS tutorial) and takes place in the summer semester. The 6C module is completed with a written exam (75-120 min.). Elementary knowledge of algorithms and data structures of computer science as well as skills in comprehending and developing algorithms are taught. Recommended prerequisite is the module "Introduction to Computer Science" or "Introduction to Programming".
For more info, please visit the program homepage.
Mechanics I
This compulsory module for civil and environmental engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise + 2 SWS tutorial) and is offered in the winter semester. The 6C module is completed with a written exam (60 min.). In this course, the basic methodology of mechanics is taught, taking into account the aspects of model building and analysis. The students are enabled, for example, to form mechanical models of simple technical systems, to calculate centers of gravity of bodies or to determine the equilibrium of structures. Recommended prerequisite is participation in the module Mathematics I.
Materials of Civil Engineering
This compulsory module for civil and environmental engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise) and is offered across semesters starting in the winter semester. The 6C module is completed with a written exam (90 min.) in the summer semester. Mechanical and physical fundamentals for the evaluation of materials and their behavior in use are taught, as well as the fundamentals of standards, production and behavior of e.g. cement, gypsum, lime, concrete, mortar, and building ceramics, etc. No prerequisites.
Environmental Science Fundamentals 1.
This compulsory module for environmental engineering consists of the courses "Environmental Science Fundamentals for Engineers" (2 SWS lecture) in the winter semester and "Modeling and Simulation" (2 SWS seminar) in the summer semester. The 6C module is completed with a written exam in the summer semester (90 min.). In the three thematic complexes land use and ecosystems, climate and water, e.g. basics of soil science, impacts of anthropogenic climate change and the hydrological cycle are taught. In addition, in the topic complexes of systems analysis and water management systems, e.g., model building and evaluation, dynamic modeling, and models and methods for system planning are taught. Basic knowledge of environmental sciences is recommended.
Structural Design / Building Physics / Representation Technology.
This compulsory module for environmental engineering consists of the three courses "Building Construction I" (2 SWS lecture + 2 SWS tutorial), "Building Physics" (2 SWS lecture) and "Representation Technology / CAD" (2 SWS lecture + 2 SWS tutorial + compact course/practical course). Building Construction I and Representation Technology / CAD take place in the winter semester, Building Physics in the summer semester. The 7C module is completed with two written examinations in Building Construction I and Building Physics (45 & 60 min.). Knowledge of the functionality of buildings and construction elements, the typology of buildings, the basics of construction drawing, the application of practice-oriented programs and the graphical representation of three-dimensional bodies as well as the basics of building physics, e.g. effects of cold, heat, humidity and noise are taught. No prerequisites.
Hydrology and Hydrogeology.
This elective module for environmental engineering consists of the course of the same name (2 SWS lecture + 2 SWS exercise) and takes place in the summer semester. The 6C module is completed with a written exam (120 min.). Students should get to know the different expressions of the elements of the hydrological cycle, evaluate them computationally and record them metrologically. No prerequisites.
Environmental Science Fundamentals 2.
This compulsory module for environmental engineering consists of the courses Environmental Chemistry (2 SWS lecture + tutorial) and Ecology (2 SWS lecture + tutorial), both taking place in the summer semester. The module is completed with a written exam (120-180 min.). Basics of general and toxicology, selected environmental pollution and environmental analysis as well as ecological elementary processes and knowledge about e.g. organisms, populations, ecosystems as well as biodiversity and nature conservation are taught. Basic knowledge of physics, chemistry, mathematics, and environmental science is recommended.
Traffic Basics
This compulsory module for civil and environmental engineering consists of the courses Fundamentals of Transport Planning (2 SWS lecture + tutorial) and Fundamentals of Transport Engineering (2 SWS + repeat tutorial/speaker session), both taking place in the summer semester. The 6C module is completed with a combined exam (120 min.). Knowledge and methods of the essential planning steps are taught, e.g. for the survey and prognosis of traffic demand or for network design. In addition, students should understand traffic engineering systems and be able to perform relevant calculations. No prerequisites.
Resource Management and Waste Engineering.
This compulsory module for environmental engineering consists of the three courses "Fundamentals of Waste Engineering" (2 SWS lecture), "Resource and Waste Management" (2 SWS lecture) and "Mechanical Waste Processing and Recycling" (2 SWS lecture). While the Fundamentals of Waste Technology is held in the summer semester, the other two courses are offered in the winter semester. The 9C module is completed with three written examinations (60 min. each). Course content includes scientific and technical fundamentals of waste management processes and central waste streams, including waste treatment technologies, but also legal and economic aspects as well as material recovery processes for different types of waste. No prerequisites.
Surveying
This compulsory module for civil and environmental engineering consists of the course "Surveying" (2 SWS lecture + exercises in small groups) and takes place in the summer semester. The 6C module is completed with a written exam (120 min.). The course contents are the basic procedures for the realization of the spatial reference (georeferencing) and the spatial data acquisition. This includes, for example, units of measurement, measurement accuracies, coordinate systems, instrumentation, and the production of site and elevation plans. No prerequisites.
Mathematics 2
Compulsory module in the 2nd semester of the Bachelor of Civil and Environmental Engineering, elective module in the Bachelor of Nanostructural Sciences with 9 credits (4 SWS lecture + 2 SWS exercise in SoSe). Contents are mainly linear systems of equations, matrices, differential and integral calculus of several variables and differential equations. Recommended prerequisite is the attendance of "Mathematics I".
The module descriptions are excerpts from the Module Handbook of the Bachelor of Environmental Engineering program. This and further information can be found on the program homepage..
STEM projects are offered at all participating departments, one of which must be chosen as a required project. If desired, additional STEM projects can be taken as elective projects. The STEM projects introduce students to project work and are completed with a course credit. They include practical components which, depending on the project task, can consist, for example, of the student's own experiments, modeling or design tasks. Through your own practical work in teams, you will gain insights into the methods, objects of investigation and application perspectives of the respective subject and get to know its specific subject culture.
The topics of the STEM projects offered vary. Examples of regularly offered STEM projects are:
- MINT Project Nanostructure Science"Nanostructures in Everyday Life":
experiments on sunscreen, coated surfaces, natural dyes, and more in the chemistry lab. - MINT Project Physics"Spectroscopy and Greenhouse Gases":
Experiments with lasers, light, colors, and absorption of greenhouse gases, among others, on research equipment. - STEM Project Civil Engineering"Tensegrity - Design, Mathematics, Mechanics and Application of Tensegrity Structures":
theory and experiments on interesting structures made of rods and cables. - STEM Project Mathematics/Technomathematics"Mathematical Modeling":
Introduction to mathematical modeling and simulation as a basis for all STEM subjects using illustrative examples.
You can find out which MINT projects are offered in the respective semester via a Moodle course.
Elective courses MINT accompanying program
You are free to choose from the following courses during the orientation phase, although you must take 12 semester hours (SWS).
Optionally, beyond the mandatory 1 SWS mentoring per semester (see above), further plusMINT seminar offerings can be attended in which interdisciplinary competencies for the further course of studies are learned.
In addition to counseling opportunities, especially for the orientation phase, workshops and lectures are offered in the plusMINT seminar, which are primarily intended to strengthen advanced study skills in interdisciplinary aspects: Study selection decisions, study and examination organization, IT skills, opportunities for student engagement, and gender and diversity.
The topics of the individual plusMINT seminar dates are published in a corresponding Moodle course.
You can attend all of the university's events in the STEM area without having to take an examination.
This will give you an insight into the events that you may have to expect in your later major and you can already acquire the topics covered there without pressure, so that you will have fewer problems in your major later in the event and exam. In addition, you can get to know the different ways of looking at and working with different disciplines without exam pressure.
For each double lesson attended, a learning log must be prepared, in which what has been learned and any difficulties encountered are reflected upon, or (if this is not used later for the completion of a module) the course credit for the event must be fulfilled.
You can also attend all of the university's events in the STEM area on an irregular basis without having to take an examination.
On the one hand, this will give you an insight into the events that you may have to expect in your future major. These can be taster visits to events from higher semesters. On the other hand, you will learn early on about the different ways of looking at and working with different disciplines.
A learning log must be prepared for each double session attended, reflecting on what you have learned and any difficulties that have arisen.
Through occasionally offered excursions to companies and construction sites, you will get a lively insight into the professional world of STEM graduates.
For each excursion, a short report must be prepared for recognition.
If you would like to spend a little longer getting a taste of what STEM graduates do, you can complete a career orientation internship. The career orientation internship is offered in two variants: A shorter variant (4-5 days) for credit of 1 SWS and a longer variant (approx. 2 weeks) for credit of 2 SWS. It is possible to divide the internship phase among several companies.
Documentation must be prepared for the career orientation internship.
Pre-course Mathematics
The preliminary course in mathematics usually takes place over several weeks before the start of lectures in the winter semester and mainly repeats the topics of school mathematics that are most important for the university. If you supplement your participation with course credit, you can receive credit for the Preliminary Mathematics Course in the MINT Accompanying Program.
This course, recommended for all, refreshes your high school mathematics knowledge, prepares you for the mathematics entrance test, and in the process exposes potential gaps that will be filled in the advanced mathematics course.
Credit in the STEM companion program (4 SWS) requires coursework in the form of written reflection assignments.
Pre-course Chemistry
The preliminary course in chemistry usually takes place before the start of lectures in the winter semester and is an intensive course in important chemical basics. If you supplement your participation with a course credit in the winter semester, you can receive credit for the Preliminary Chemistry Course in the MINT Accompanying Program.
The preliminary chemistry course can be taken concurrently with the preliminary mathematics course and is especially recommended if you are interested in majoring in civil engineering, mechanical engineering, nanostructure science, physics, and environmental engineering, as these majors include chemistry components.
In order to receive credit in the MINT companion program (4 SWS), a course credit in the form of successfully completed exercises must be submitted.
Bridge course in physics
The bridge course in physics takes place for two hours each in the winter and summer semester and helps especially with problems in the lecture Experimental Physics I and II.
For credit in the MINT accompanying program (2 SWS per semester), a course achievement in the form of regular active participation must be achieved.
Physics for Engineers
This lecture plus tutorial course provides a good physics fundamentals review at baccalaureate level plus, tailored for civil and environmental engineers.
Didactic Physics Seminar
This seminar takes place from the second half of the semester on in the winter and summer semester parallel to the lecture "Experimental Physics I" and "Experimental Physics II" for two hours and repeats the contents of the first half of the lecture "Experimental Physics" (in WiSe mechanics, in SoSe electricity) with a didactic focus.
MINT Thinking Sport
In this new event, developed as part of the plusMINT course, logical thinking will be trained with puzzles from all corners of the STEM field.
Programming course Phython
An introduction to the Python programming language as part of the Nanostructure Science and Advanced Physical Chemistry labs.